Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Green 240-pin DDR3 server memory module with black chips and gold contacts

Kingston Technology Corp.

Kingston Technology Corp. KVR1333D3S4R9S/2G 2GB DDR3 1333 ECC Registered server RAM

SKU CH-6E9A-SJ3DY MPN KVR1333D3S4R9S/2G

Adds 2 GB of DDR3 1333 ECC Registered memory with CL9 latency and 1.50 V operation

  • Capacity2GB
  • Type240-Pin DDR3 SDRAM
  • SpeedDDR3 1333
  • CAS LatencyCL9
  • Voltage1.50V
  • ECCYes
  • ECC registered design protects data integrity in servers
  • DDR3 1333 speed delivers reliable throughput for legacy platforms
  • CL9 latency supports responsive operation under load
  • Single-rank x4 layout with thermal sensor aids stability
  • 240-pin DDR3 form factor fits compatible server boards

2GB DDR3 1333 ECC Registered module

This 2GB DDR3 1333 ECC Registered module is built for servers and workstations that require error-correcting, registered memory. It operates at 1.50V with CL9 latency and includes a thermal sensor for platform monitoring. The single-rank x4 organisation suits density-limited DIMM slots.

Upgrade from non-ECC or unbuffered DDR3

Replacing non-ECC or unbuffered DDR3 with this registered ECC module adds data-integrity protection and reduces electrical load on the memory controller. The jump is worth it when the platform mandates registered DIMMs and the workload cannot tolerate silent data corruption.

DDR3 1333 registered platform limits

DDR3 1333 registered memory tops out at the 1333 MT/s data rate and 1.50V operation defined by the JEDEC standard for this generation. Platforms that require higher frequencies, lower voltages or unbuffered signalling cannot use these modules. Capacity per DIMM is limited by the DDR3 architecture and the registered buffer design.

Kohokohdat

  • ECC registered design protects data integrity in servers
  • DDR3 1333 speed delivers reliable throughput for legacy platforms
  • CL9 latency supports responsive operation under load
  • Single-rank x4 layout with thermal sensor aids stability
  • 240-pin DDR3 form factor fits compatible server boards

Tekniset tiedot

BrandKingston
ModelKVR1333D3S4R9S/2G
Capacity2GB
Type240-Pin DDR3 SDRAM
SpeedDDR3 1333
CAS LatencyCL9
Voltage1.50V
ECCYes
Buffered/RegisteredRegistered
FeaturesParity RAM
Single Rank, x4 w/Therm Sen
Lähetyspaino0.05 kg
Pakkauksen mitat171 × 57 × 16 mm

Kysymyksiä tästä tuotteesta

Will the 240-pin DDR3 module fit my server's DIMM slots?

The module uses the standard 240-pin DDR3 form factor, so it fits any server motherboard slot designed for DDR3 registered memory.

What is the correct way to seat this registered ECC module, and what step is often missed?

Align the notch with the slot key, press firmly until both retention clips click, and verify the thermal sensor contacts the motherboard pad — this last step is frequently overlooked.

When should I consider replacing this 2GB DDR3 1333 module?

Replace it if memory diagnostics report correctable ECC errors that become uncorrectable, or if the server fails to recognise the full 2GB capacity during POST.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.