Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se

Kingston Technology Corp.

Kingston Technology Corp. KVR1333D3S4R9S/2G 2GB DDR3 1333 ECC Registered server RAM

SKU CH-6E9A-SJ3DY MPN KVR1333D3S4R9S/2G

Adds 2 GB of DDR3 1333 ECC Registered memory with CL9 latency and 1.50 V operation

  • Capacity2GB
  • Type240-Pin DDR3 SDRAM
  • SpeedDDR3 1333
  • CAS LatencyCL9
  • Voltage1.50V
  • ECCYes
  • ECC registered design protects data integrity in servers
  • DDR3 1333 speed delivers reliable throughput for legacy platforms
  • CL9 latency supports responsive operation under load
  • Single-rank x4 layout with thermal sensor aids stability
  • 240-pin DDR3 form factor fits compatible server boards

2GB DDR3 1333 ECC Registered module

This 2GB DDR3 1333 ECC Registered module is built for servers and workstations that require error-correcting, registered memory. It operates at 1.50V with CL9 latency and includes a thermal sensor for platform monitoring. The single-rank x4 organisation suits density-limited DIMM slots.

Upgrade from non-ECC or unbuffered DDR3

Replacing non-ECC or unbuffered DDR3 with this registered ECC module adds data-integrity protection and reduces electrical load on the memory controller. The jump is worth it when the platform mandates registered DIMMs and the workload cannot tolerate silent data corruption.

DDR3 1333 registered platform limits

DDR3 1333 registered memory tops out at the 1333 MT/s data rate and 1.50V operation defined by the JEDEC standard for this generation. Platforms that require higher frequencies, lower voltages or unbuffered signalling cannot use these modules. Capacity per DIMM is limited by the DDR3 architecture and the registered buffer design.

Přednosti

  • ECC registered design protects data integrity in servers
  • DDR3 1333 speed delivers reliable throughput for legacy platforms
  • CL9 latency supports responsive operation under load
  • Single-rank x4 layout with thermal sensor aids stability
  • 240-pin DDR3 form factor fits compatible server boards

Specifikace

BrandKingston
ModelKVR1333D3S4R9S/2G
Capacity2GB
Type240-Pin DDR3 SDRAM
SpeedDDR3 1333
CAS LatencyCL9
Voltage1.50V
ECCYes
Buffered/RegisteredRegistered
FeaturesParity RAM
Single Rank, x4 w/Therm Sen
Přepravní hmotnost0.05 kg
Rozměry balení171 × 57 × 16 mm

Otázky k tomuto produktu

Will the 240-pin DDR3 module fit my server's DIMM slots?

The module uses the standard 240-pin DDR3 form factor, so it fits any server motherboard slot designed for DDR3 registered memory.

What is the correct way to seat this registered ECC module, and what step is often missed?

Align the notch with the slot key, press firmly until both retention clips click, and verify the thermal sensor contacts the motherboard pad — this last step is frequently overlooked.

When should I consider replacing this 2GB DDR3 1333 module?

Replace it if memory diagnostics report correctable ECC errors that become uncorrectable, or if the server fails to recognise the full 2GB capacity during POST.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.