NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
Kingston Technology Corp.
16GB DDR3 1600 ECC registered memory with CL11 latency for server stability
This 16 GB DDR3 module is built for servers that demand maximum stability and continuous operation. It uses registered ECC technology to detect and correct data errors in real time. The product is suited for IT professionals managing infrastructure where downtime is unacceptable.
The memory runs at DDR3 1600 (PC3 12800) with a CAS latency of CL11 and a voltage of 1.50 V. Registered buffering adds one clock cycle to command timing, which is standard for this class of module. Systems must support registered ECC DDR3 to use this memory; consumer platforms that accept only unbuffered non-ECC DIMMs cannot use it.
Installation follows the standard 240-pin DDR3 DIMM procedure: align the notch, press firmly until the latches click, and verify detection in BIOS. The most common issue is mixing registered modules with unbuffered memory or populating slots in an order the server firmware does not support. The advanced Product Change Notification process helps maintain consistent component sourcing for future upgrades.
| Brand | Kingston |
|---|---|
| Model | KVR16R11D4/16HA |
| Capacity | 16GB |
| Type | 240-Pin DDR3 SDRAM |
| Speed | DDR3 1600 (PC3 12800) |
| CAS Latency | CL11 |
| Voltage | 1.50V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Features | Standard 2G X 72 FBGA, Gold w/TS |
| Lähetyspaino | 0.02 kg |
| Pakkauksen mitat | 171 × 56 × 17 mm |
This module provides 16GB per stick at DDR3 1600 with ECC Registered operation; match total capacity to your motherboard's slot count and maximum supported memory.
It runs at 1600 MT/s with CL11 latency and 1.50V, giving the rated throughput for compatible DDR3 platforms when populated according to the board's memory-configuration rules.
The 240-pin DDR3 form factor with registered ECC requires a server chipset that supports registered modules; speed will not exceed DDR3 1600 and the memory controller must be DDR3 compatible.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?