NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.
Kingston Technology Corp.
16GB DDR3 1600 ECC registered memory with CL11 latency for server stability
This 16 GB DDR3 module is built for servers that demand maximum stability and continuous operation. It uses registered ECC technology to detect and correct data errors in real time. The product is suited for IT professionals managing infrastructure where downtime is unacceptable.
The memory runs at DDR3 1600 (PC3 12800) with a CAS latency of CL11 and a voltage of 1.50 V. Registered buffering adds one clock cycle to command timing, which is standard for this class of module. Systems must support registered ECC DDR3 to use this memory; consumer platforms that accept only unbuffered non-ECC DIMMs cannot use it.
Installation follows the standard 240-pin DDR3 DIMM procedure: align the notch, press firmly until the latches click, and verify detection in BIOS. The most common issue is mixing registered modules with unbuffered memory or populating slots in an order the server firmware does not support. The advanced Product Change Notification process helps maintain consistent component sourcing for future upgrades.
| Brand | Kingston |
|---|---|
| Model | KVR16R11D4/16HA |
| Capacity | 16GB |
| Type | 240-Pin DDR3 SDRAM |
| Speed | DDR3 1600 (PC3 12800) |
| CAS Latency | CL11 |
| Voltage | 1.50V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Features | Standard 2G X 72 FBGA, Gold w/TS |
| Teža pošiljke | 0.02 kg |
| Velikost pošiljke | 171 × 56 × 17 mm |
This module provides 16GB per stick at DDR3 1600 with ECC Registered operation; match total capacity to your motherboard's slot count and maximum supported memory.
It runs at 1600 MT/s with CL11 latency and 1.50V, giving the rated throughput for compatible DDR3 platforms when populated according to the board's memory-configuration rules.
The 240-pin DDR3 form factor with registered ECC requires a server chipset that supports registered modules; speed will not exceed DDR3 1600 and the memory controller must be DDR3 compatible.
Tudi v tem oddelku
Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.
V čem plačujete in v čem berete cene.
Poslano iz Vaše denarnice ob blagajni
Samo za prikaz — katalog je cenovno izražen v dolarjih
Nobena valuta ne ustreza.
Izberite jezik, v katerem Vam govori spletna stran.
Prvič tu?
Že imate račun?
Samodejne ponastavitve ni: ta trgovina ne pošilja e-pošte, zato ni enkratne povezave, ki bi jo lahko zahtevali. Pustite naslov na računu — nekdo ga bo obravnaval ročno.
Zahteva zabeležena
V Vašo elektronsko pošto ne prihaja nič — ta trgovina ne pošilja nobene e-pošte. Zahteve nekdo obravnava ročno.
Ste se spomnili?