NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
Kingston Technology Corp.
2GB DDR2 800 desktop module rated CL6 at 1.8V, delivering 6.4GB/s bandwidth
This 2GB DDR2 800 module is built for older desktop systems that still run on DDR2 memory. It delivers a 2GB capacity at 800MHz with a CL6 latency and operates at the standard 1.8V voltage. The unbuffered, non-ECC design fits typical home and office motherboards from that era.
The module follows the PC2 6400 standard, providing up to 6.4GBps bandwidth per channel. Its CL6 timing and 1.80V operation match the JEDEC specification for DDR2 800, so the memory runs at its rated speed without manual configuration. No extra software or accessories are included to change this behaviour.
Installation requires aligning the notch on the DIMM with the motherboard slot key and pressing down until the retention clips lock. Because the module is unbuffered and non-ECC, it will not work in servers or workstations that require registered or ECC memory. Buyers who need more than 2GB per slot or a different DDR generation must choose another product.
| Brand | Kingston |
|---|---|
| Model | KVR800D2N6/2G |
| Capacity | 2GB |
| Speed | DDR2 800 (PC2 6400) |
| CAS Latency | CL6 |
| Voltage | 1.80V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Lähetyspaino | 0.02 kg |
| Pakkauksen mitat | 147 × 46 × 9 mm |
The modules run at the standard 1.80V for DDR2 and are unbuffered, so they do not require active cooling or voltage changes; normal case airflow is sufficient.
The rated bandwidth is 6.4GBps per channel at 800MHz, and the CL6 latency sets the timing limit you will reach under sustained load.
With no ECC or registered circuitry and a standard 1.80V supply, the module generates minimal heat and is completely silent; typical chassis airflow handles it.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?