NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.
Kingston Technology Corp.
2GB DDR2 800 desktop module rated CL6 at 1.8V, delivering 6.4GB/s bandwidth
This 2GB DDR2 800 module is built for older desktop systems that still run on DDR2 memory. It delivers a 2GB capacity at 800MHz with a CL6 latency and operates at the standard 1.8V voltage. The unbuffered, non-ECC design fits typical home and office motherboards from that era.
The module follows the PC2 6400 standard, providing up to 6.4GBps bandwidth per channel. Its CL6 timing and 1.80V operation match the JEDEC specification for DDR2 800, so the memory runs at its rated speed without manual configuration. No extra software or accessories are included to change this behaviour.
Installation requires aligning the notch on the DIMM with the motherboard slot key and pressing down until the retention clips lock. Because the module is unbuffered and non-ECC, it will not work in servers or workstations that require registered or ECC memory. Buyers who need more than 2GB per slot or a different DDR generation must choose another product.
| Brand | Kingston |
|---|---|
| Model | KVR800D2N6/2G |
| Capacity | 2GB |
| Speed | DDR2 800 (PC2 6400) |
| CAS Latency | CL6 |
| Voltage | 1.80V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Greutate la expediere | 0.02 kg |
| Dimensiunile coletului | 147 × 46 × 9 mm |
The modules run at the standard 1.80V for DDR2 and are unbuffered, so they do not require active cooling or voltage changes; normal case airflow is sufficient.
The rated bandwidth is 6.4GBps per channel at 800MHz, and the CL6 latency sets the timing limit you will reach under sustained load.
With no ECC or registered circuitry and a standard 1.80V supply, the module generates minimal heat and is completely silent; typical chassis airflow handles it.
Tot din acest raion
Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.
În ce monedă plătiți și în ce monedă citiți prețurile.
Trimis din portofelul dumneavoastră la finalizarea comenzii
Doar pentru afișare — catalogul este exprimat în dolari
Nicio monedă nu corespunde.
Alegeți limba în care vă vorbește site-ul.
Prima vizită?
Aveți deja un cont?
Nu există o resetare automată: acest magazin nu trimite niciun e-mail, deci nu există niciun link de unică folosință de solicitat. Lăsați adresa în cont. Va fi tratată manual.
Cerere înregistrată
Nu veți primi nimic în căsuța de e-mail — acest magazin nu trimite niciun e-mail. Cineva se ocupă de asta manual.
V-ați amintit-o?