Kingston Technology Corp. SEDC600ME/480G enterprise SSD 480GB SATA 2.5
- 2.5"
- 480GB
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
Kingston Technology Corp.
A 7.68 TB SATA enterprise SSD with 3D TLC, 1 DWPD endurance and 256-bit AES encryption for mixed-use server workloads
The Kingston SEDC600ME/7680G is a 7.68TB 2.5 inch SATA SSD built for mixed-use server and data-centre workloads. Its 3D TLC NAND and 1 DWPD endurance rating suit read-heavy databases, virtualisation hosts and content repositories that need consistent latency.
The 7mm z-height fits standard hot-swap bays and backplanes using the SATA III interface. Hardware-based 256-bit AES encryption secures data at rest without host software overhead, and the 2 million hour MTBF plus vibration tolerance up to 2.17G operating support continuous rack deployment.
Verify the chassis or controller provides a 6Gbps SATA port and 2.5 inch bay with 7mm clearance. Confirm the workload stays within the 14016TB total bytes written budget and that the 0 to 70°C operating range matches your airflow design. Builds needing PCIe bandwidth or higher write endurance should evaluate alternative interfaces.
| Brand | Kingston |
|---|---|
| Model | SEDC600ME/7680G |
| Form Factor | 2.5" |
| Capacity | 7.68TB |
| Memory Components | 3D TLC |
| Interface | SATA III |
| Max Sequential Read | Up to 560 MBps |
| Max Sequential Write | Up to 530 MBps |
| 4KB Random Read | Up to 94,000 IOPS |
| 4KB Random Write | Up to 34,000 IOPS |
| Read Latency | <130 us |
| Write Latency | <70 us |
| Endurance | 1 DWPD |
| Terabytes Written (TBW) | 14016TB |
| MTBF | 2,000,000 hours |
| Power Consumption (Idle) | 1.30W |
| Power Consumption (Active) | Average: 1.45W Max Read: 1.6W Max Write: 3.6W |
| Operating Temperature | 0°C ~ +70°C |
| Storage Temperature | -40°C ~ +85°C |
| Max Vibration Resistance | 2.17G Peak (7-800Hz) operating 20G Peak (10-2000Hz) non-operating |
| Height | 7mm |
| Width | 100mm |
| Depth | 69.9mm |
| Weight | 92.34g |
| Lähetyspaino | 0.45 kg |
| Pakkauksen mitat | 178 × 127 × 76 mm |
Tämän mallin muut versiot
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
The SATA 600 interface caps sequential throughput at 560 MBps read and 530 MBps write for this 7.68 TB model.
It fits a standard 2.5 inch bay using 7 mm height, 100 mm width and 69.9 mm depth.
Mount the 92.34 g drive in a 2.5 inch bay, connect SATA data and power cables, then enable 256-bit AES encryption in the RAID controller or OS before writing data.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?