Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Clear spool of 2.85 mm dissolvable filament, 0.25 kg

Lay Filaments

Lay Filaments HIGH-T-Lay Dissolvable Support Filament 2.85 mm 0.25 kg

SKU CH-BJ3N-Q1KZ1

Water-soluble support filament withstands 100 °C, prints at 235–250 °C, and dissolves quickly without chemicals

  • Dissolves quickly in plain water without chemicals
  • Withstands 100 °C for extended high-temp printing
  • Bonds strongly to ABS, POM and polycarbonate
  • Extrudes at 240 °C for technical material pairing
  • Precise 2.85 mm diameter with ± .1 mm tolerance

HIGH-T-Lay dissolvable support filament

HIGH-T-Lay is a water-soluble support filament designed for FDM printers that use 2.85 mm material. It withstands nozzle temperatures up to 240 °C and bed temperatures of 50 °C, making it suitable for high-temperature engineering plastics. The spool contains 0.25 kg of filament with a diameter tolerance of ±0.1 mm.

Upgrades from HIPS and break-away supports

Unlike traditional HIPS, HIGH-T-Lay dissolves in plain water without D-Limonene, removing the need for chemical handling and ventilation. It adheres strongly to ABS, POM and polycarbonate, so it replaces break-away supports that can damage delicate overhangs. The jump is worth it when printing complex geometries in high-temperature filaments that exceed the thermal limits of standard PVA.

Capacity and thermal headroom

The 0.25 kg spool provides enough support material for multiple small-to-medium prints or a single large, dense support structure. It comfortably handles prolonged exposure to 100 °C chamber or ambient temperatures without softening. Headroom runs out on very large production runs that demand kilogram-scale support volumes or on printers limited to lower extrusion temperatures.

Kohokohdat

  • Dissolves quickly in plain water without chemicals
  • Withstands 100 °C for extended high-temp printing
  • Bonds strongly to ABS, POM and polycarbonate
  • Extrudes at 240 °C for technical material pairing
  • Precise 2.85 mm diameter with ± .1 mm tolerance

Tekniset tiedot

BrandLay Filaments

Kysymyksiä tästä tuotteesta

Will the 2.85 mm diameter with ±0.1 mm tolerance feed through my Bowden tube without binding?

The filament is manufactured to 2.85 mm with a tolerance of ±0.1 mm, matching the standard 3.0 mm class used in most Bowden systems.

What nozzle temperature should I set for the first layer so the support adheres to ABS without jamming?

Start at 235 °C for the first layer; the recommended printing range is 235–250 °C and the bed should be at 50 °C.

How do I remove the support after printing and does the water need to be heated?

Submerge the finished part in plain water; the material dissolves quickly at room temperature and requires no chemical solvents.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.