我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Clear spool of 2.85 mm dissolvable filament, 0.25 kg

Lay Filaments

Lay Filaments HIGH-T-Lay Dissolvable Support Filament 2.85 mm 0.25 kg

SKU CH-BJ3N-Q1KZ1

Water-soluble support filament withstands 100 °C, prints at 235–250 °C, and dissolves quickly without chemicals

  • Dissolves quickly in plain water without chemicals
  • Withstands 100 °C for extended high-temp printing
  • Bonds strongly to ABS, POM and polycarbonate
  • Extrudes at 240 °C for technical material pairing
  • Precise 2.85 mm diameter with ± .1 mm tolerance

HIGH-T-Lay dissolvable support filament

HIGH-T-Lay is a water-soluble support filament designed for FDM printers that use 2.85 mm material. It withstands nozzle temperatures up to 240 °C and bed temperatures of 50 °C, making it suitable for high-temperature engineering plastics. The spool contains 0.25 kg of filament with a diameter tolerance of ±0.1 mm.

Upgrades from HIPS and break-away supports

Unlike traditional HIPS, HIGH-T-Lay dissolves in plain water without D-Limonene, removing the need for chemical handling and ventilation. It adheres strongly to ABS, POM and polycarbonate, so it replaces break-away supports that can damage delicate overhangs. The jump is worth it when printing complex geometries in high-temperature filaments that exceed the thermal limits of standard PVA.

Capacity and thermal headroom

The 0.25 kg spool provides enough support material for multiple small-to-medium prints or a single large, dense support structure. It comfortably handles prolonged exposure to 100 °C chamber or ambient temperatures without softening. Headroom runs out on very large production runs that demand kilogram-scale support volumes or on printers limited to lower extrusion temperatures.

商品特色

  • Dissolves quickly in plain water without chemicals
  • Withstands 100 °C for extended high-temp printing
  • Bonds strongly to ABS, POM and polycarbonate
  • Extrudes at 240 °C for technical material pairing
  • Precise 2.85 mm diameter with ± .1 mm tolerance

商品規格

BrandLay Filaments

商品問答

Will the 2.85 mm diameter with ±0.1 mm tolerance feed through my Bowden tube without binding?

The filament is manufactured to 2.85 mm with a tolerance of ±0.1 mm, matching the standard 3.0 mm class used in most Bowden systems.

What nozzle temperature should I set for the first layer so the support adheres to ABS without jamming?

Start at 235 °C for the first layer; the recommended printing range is 235–250 °C and the bed should be at 50 °C.

How do I remove the support after printing and does the water need to be heated?

Submerge the finished part in plain water; the material dissolves quickly at room temperature and requires no chemical solvents.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。