Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Rectangular metal mining unit, matte silver finish, four fans visible on one side, Ethernet port on rear, 290 by 195.5 by 370 mm

letine

letine Antminer L7 9500Mh 9.50 Gh/s 3425 W

SKU CH-QWYN-J2QGS

Bitmain ASIC miner for Scrypt algorithm delivering 9.50 Gh/s at 3425 W power draw

  • 50 Gh/s Scrypt hashrate for high mining throughput
  • 3425 W power draw with ±10 % tolerance for predictable energy costs
  • 75 dB noise level suits dedicated facility placement
  • 290 × 195.5 × 370 mm footprint fits standard rack layouts
  • Ethernet interface enables stable wired pool connectivity

Antminer L7 9500Mh Scrypt Miner

The Antminer L7 9500Mh is an ASIC miner built for the Scrypt algorithm, delivering a hashrate of 9.50 Gh/s with a power draw of 3425 W. It targets operators who run dedicated mining farms or rack environments where 75 dB noise and 15 kg weight are acceptable. The unit ships new from Bitmain with a factory serial number and connects via Ethernet.

Sustained Load Behaviour

Continuous operation at the rated 3425 W produces steady heat that must be exhausted from a room kept between 5 and 45 °C and 5 to 95 % humidity. Four onboard fans move air through the 290 by 195.5 by 370 mm chassis, but the 75 dB sound level makes the unit unsuitable for office or home settings without dedicated acoustic isolation. Power consumption can vary with the external PSU used.

Installation Practicalities

The miner arrives without a power cable, so a compatible high-wattage PSU and appropriate cables must be sourced separately before first boot. Physical mounting requires a rack or shelf able to support 15 kg and the stated footprint, plus clearance for front-to-rear airflow. Network setup is straightforward over Ethernet, but the loud fans and heat output often surprise builders who underestimate facility cooling and noise requirements.

Kohokohdat

  • 50 Gh/s Scrypt hashrate for high mining throughput
  • 3425 W power draw with ±10 % tolerance for predictable energy costs
  • 75 dB noise level suits dedicated facility placement
  • 290 × 195.5 × 370 mm footprint fits standard rack layouts
  • Ethernet interface enables stable wired pool connectivity

Tekniset tiedot

Tälle tuotteelle ei ole vielä julkaistu teknisiä tietoja.

Kysymyksiä tästä tuotteesta

What power supply capacity is required for the 3425 W draw?

The unit draws up to 3425 W, so select a quality PSU rated above that figure with the correct connectors.

Will the 75 dB noise level suit a home office?

At 75 dB the miner is as loud as a vacuum cleaner; a dedicated ventilated space is recommended.

What are the physical dimensions for rack planning?

The chassis measures 290 mm high, 195.5 mm wide and 370 mm long and weighs 15 kg.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.