Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Rectangular metal mining unit, matte silver finish, four fans visible on one side, Ethernet port on rear, 290 by 195.5 by 370 mm

letine

letine Antminer L7 9500Mh 9.50 Gh/s 3425 W

SKU CH-QWYN-J2QGS

Bitmain ASIC miner for Scrypt algorithm delivering 9.50 Gh/s at 3425 W power draw

  • 50 Gh/s Scrypt hashrate for high mining throughput
  • 3425 W power draw with ±10 % tolerance for predictable energy costs
  • 75 dB noise level suits dedicated facility placement
  • 290 × 195.5 × 370 mm footprint fits standard rack layouts
  • Ethernet interface enables stable wired pool connectivity

Antminer L7 9500Mh Scrypt Miner

The Antminer L7 9500Mh is an ASIC miner built for the Scrypt algorithm, delivering a hashrate of 9.50 Gh/s with a power draw of 3425 W. It targets operators who run dedicated mining farms or rack environments where 75 dB noise and 15 kg weight are acceptable. The unit ships new from Bitmain with a factory serial number and connects via Ethernet.

Sustained Load Behaviour

Continuous operation at the rated 3425 W produces steady heat that must be exhausted from a room kept between 5 and 45 °C and 5 to 95 % humidity. Four onboard fans move air through the 290 by 195.5 by 370 mm chassis, but the 75 dB sound level makes the unit unsuitable for office or home settings without dedicated acoustic isolation. Power consumption can vary with the external PSU used.

Installation Practicalities

The miner arrives without a power cable, so a compatible high-wattage PSU and appropriate cables must be sourced separately before first boot. Physical mounting requires a rack or shelf able to support 15 kg and the stated footprint, plus clearance for front-to-rear airflow. Network setup is straightforward over Ethernet, but the loud fans and heat output often surprise builders who underestimate facility cooling and noise requirements.

Puncte forte

  • 50 Gh/s Scrypt hashrate for high mining throughput
  • 3425 W power draw with ±10 % tolerance for predictable energy costs
  • 75 dB noise level suits dedicated facility placement
  • 290 × 195.5 × 370 mm footprint fits standard rack layouts
  • Ethernet interface enables stable wired pool connectivity

Specificații

Nicio specificație publicată pentru acest articol deocamdată.

Întrebări despre acest articol

What power supply capacity is required for the 3425 W draw?

The unit draws up to 3425 W, so select a quality PSU rated above that figure with the correct connectors.

Will the 75 dB noise level suit a home office?

At 75 dB the miner is as loud as a vacuum cleaner; a dedicated ventilated space is recommended.

What are the physical dimensions for rack planning?

The chassis measures 290 mm high, 195.5 mm wide and 370 mm long and weighs 15 kg.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.