Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
White mid-tower ATX case with tempered glass sides and light wood front accent

Lian Li

Lian Li LAN217W LANCOOL 217 White Mid-Tower ATX PC Case

SKU CH-0ZG6-GPMP8 MPN LAN217W

Mid-tower ATX case with five pre-installed PWM fans (two 170 mm, two 120 mm, one 140 mm), adjustable front fan mounts, dual PSU orientation up to 220 mm.

  • TypeATX Mid Tower
  • ColorWhite
  • Case MaterialSteel
  • Side Panel2 x Sides Tempered Glass Panel
  • Fan OptionsBottom - 2 x 120mm
  • Pre-installed FansFront - 2 x 170mm / Middle - 3 x 120mm / Rear - 1 x 140mm

Options White

  • Five pre-installed fans including two 170mm and one 140mm deliver strong airflow out of the box
  • Front fans can be raised to direct air straight at the CPU for targeted cooling
  • Real wood accent on the front panel adds a natural aesthetic to the white finish
  • PSU can be mounted in two orientations supporting units up to 220mm long for flexible cable routing
  • Tool-less fan mounts and dual power buttons simplify build and daily use

Mid-Tower Case with Real Wood Accents

The Lian Li LANCOOL 217 White is a steel ATX mid-tower designed for builders who value a natural aesthetic alongside high airflow. It features tempered glass side panels and a front panel framed with genuine light birch wood. Five PWM fans come pre-installed, providing immediate cooling for demanding components.

Sustained-Load Cooling Behaviour

Two 170mm front fans and two 120mm reversed-blade middle fans move high volumes of air across the CPU and GPU during extended workloads. The front fans can be raised into a dedicated CPU mode to concentrate airflow on the processor socket. A rear 140mm fan exhausts heat efficiently, maintaining stable temperatures over long sessions.

Practical Interface Limits

The case supports motherboards up to E-ATX and EEB form factors and is compatible with back-connect designs. Power supplies up to 220mm in length can be mounted in two orientations for cable routing flexibility. Additional 120mm fan slots at the bottom allow further intake expansion if required.

Kohokohdat

  • Five pre-installed fans including two 170mm and one 140mm deliver strong airflow out of the box
  • Front fans can be raised to direct air straight at the CPU for targeted cooling
  • Real wood accent on the front panel adds a natural aesthetic to the white finish
  • PSU can be mounted in two orientations supporting units up to 220mm long for flexible cable routing
  • Tool-less fan mounts and dual power buttons simplify build and daily use

Tekniset tiedot

BrandLIAN LI
TypeATX Mid Tower
ColorWhite
Case MaterialSteel
Side Panel2 x Sides Tempered Glass Panel
Fan OptionsBottom - 2 x 120mm
Pre-installed FansFront - 2 x 170mm / Middle - 3 x 120mm / Rear - 1 x 140mm
Dimensions18.98" x 9.37" x 19.80"
Lähetyspaino13.61 kg
Pakkauksen mitat578 × 565 × 327 mm

Tämän mallin muut versiot

1 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

How loud are the five pre-installed fans when the system runs continuously?

The five pre-installed fans are PWM controlled, so they spin slower and quieter at low load and ramp up only when temperatures rise, keeping noise proportional to actual cooling demand.

Which separate components must I already own before this case can function as a complete PC?

You need a motherboard up to E-ATX size, a graphics card, a power supply up to 220 mm long, storage drives and an operating system; the case itself supplies only the chassis, panels and the five pre-installed fans.

Will my existing 140 mm rear fan fit the rear mount if I want to keep it?

The rear mount is designed for a 140 mm fan and one comes pre-installed, so your existing 140 mm fan will fit the same location without modification.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.