Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.

Spremljani izdelki Prijava
White mid-tower ATX case with tempered glass sides and light wood front accent

Lian Li

Lian Li LAN217W LANCOOL 217 White Mid-Tower ATX PC Case

SKU CH-0ZG6-GPMP8 MPN LAN217W

Mid-tower ATX case with five pre-installed PWM fans (two 170 mm, two 120 mm, one 140 mm), adjustable front fan mounts, dual PSU orientation up to 220 mm.

  • TypeATX Mid Tower
  • ColorWhite
  • Case MaterialSteel
  • Side Panel2 x Sides Tempered Glass Panel
  • Fan OptionsBottom - 2 x 120mm
  • Pre-installed FansFront - 2 x 170mm / Middle - 3 x 120mm / Rear - 1 x 140mm

Options White

  • Five pre-installed fans including two 170mm and one 140mm deliver strong airflow out of the box
  • Front fans can be raised to direct air straight at the CPU for targeted cooling
  • Real wood accent on the front panel adds a natural aesthetic to the white finish
  • PSU can be mounted in two orientations supporting units up to 220mm long for flexible cable routing
  • Tool-less fan mounts and dual power buttons simplify build and daily use

Mid-Tower Case with Real Wood Accents

The Lian Li LANCOOL 217 White is a steel ATX mid-tower designed for builders who value a natural aesthetic alongside high airflow. It features tempered glass side panels and a front panel framed with genuine light birch wood. Five PWM fans come pre-installed, providing immediate cooling for demanding components.

Sustained-Load Cooling Behaviour

Two 170mm front fans and two 120mm reversed-blade middle fans move high volumes of air across the CPU and GPU during extended workloads. The front fans can be raised into a dedicated CPU mode to concentrate airflow on the processor socket. A rear 140mm fan exhausts heat efficiently, maintaining stable temperatures over long sessions.

Practical Interface Limits

The case supports motherboards up to E-ATX and EEB form factors and is compatible with back-connect designs. Power supplies up to 220mm in length can be mounted in two orientations for cable routing flexibility. Additional 120mm fan slots at the bottom allow further intake expansion if required.

Poudarki

  • Five pre-installed fans including two 170mm and one 140mm deliver strong airflow out of the box
  • Front fans can be raised to direct air straight at the CPU for targeted cooling
  • Real wood accent on the front panel adds a natural aesthetic to the white finish
  • PSU can be mounted in two orientations supporting units up to 220mm long for flexible cable routing
  • Tool-less fan mounts and dual power buttons simplify build and daily use

Specifikacije

BrandLIAN LI
TypeATX Mid Tower
ColorWhite
Case MaterialSteel
Side Panel2 x Sides Tempered Glass Panel
Fan OptionsBottom - 2 x 120mm
Pre-installed FansFront - 2 x 170mm / Middle - 3 x 120mm / Rear - 1 x 140mm
Dimensions18.98" x 9.37" x 19.80"
Teža pošiljke13.61 kg
Velikost pošiljke578 × 565 × 327 mm

Druge različice tega modela

še 1 v isti paleti

Ista družina, različen pomnilnik, hladilnik ali takt — primerjajte, preden se odločite.

Vprašanja o tem izdelku

How loud are the five pre-installed fans when the system runs continuously?

The five pre-installed fans are PWM controlled, so they spin slower and quieter at low load and ramp up only when temperatures rise, keeping noise proportional to actual cooling demand.

Which separate components must I already own before this case can function as a complete PC?

You need a motherboard up to E-ATX size, a graphics card, a power supply up to 220 mm long, storage drives and an operating system; the case itself supplies only the chassis, panels and the five pre-installed fans.

Will my existing 140 mm rear fan fit the rear mount if I want to keep it?

The rear mount is designed for a 140 mm fan and one comes pre-installed, so your existing 140 mm fan will fit the same location without modification.

Tudi v tem oddelku

Stranke so primerjale tudi te

Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.