Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Small green circuit board with USB-C connector and pin headers

LORDWORLD

LORDWORLD ESP32-C5-Zero Mini Dual-Band Wi-Fi 6 Development Board

SKU CH-9WAY-0TTGT

Compact IoT board with dual-band Wi-Fi 6, Bluetooth 5, Zigbee 3.0 and Thread on a RISC-V MCU

  • Dual-band Wi-Fi 6 covers 2.4 and 5 GHz
  • Bluetooth 5 low energy extends battery life for sensors
  • IEEE 802.15.4 radio enables Zigbee 3.0 and Thread networks
  • RISC-V core runs ESP-IDF, Arduino and MicroPython code
  • USB Type-C port simplifies power and programming

ESP32-C5 RISC-V MCU for IoT

This board integrates an ESP32-C5 RISC-V microcontroller with dual-band Wi-Fi 6, Bluetooth 5 (LE) and IEEE 802.15.4 radio supporting Zigbee 3.0 and Thread. It provides multi-function GPIO pins and a USB Type-C port for power and programming. The platform targets makers and engineers building compact wireless IoT nodes.

Suited for multi-protocol wireless projects

Developers who need simultaneous 2.4 GHz and 5 GHz Wi-Fi 6 alongside Bluetooth LE and 802.15.4 mesh in a small form factor will find this board convenient. It supports ESP-IDF, Arduino and MicroPython with SDKs and tutorials to accelerate prototyping. Projects that require only single-band 2.4 GHz connectivity or lack a USB-C host port should consider other options.

Dual-band Wi-Fi 6 with 802.15.4 mesh

The defining specification is the combined dual-band Wi-Fi 6 and IEEE 802.15.4 radio enabling Zigbee 3.0 and Thread on one chip. This single feature determines whether the board matches a design that needs both high-throughput Wi-Fi 6 and low-power mesh networking. Without that dual-protocol requirement a simpler module may suffice.

Kohokohdat

  • Dual-band Wi-Fi 6 covers 2.4 and 5 GHz
  • Bluetooth 5 low energy extends battery life for sensors
  • IEEE 802.15.4 radio enables Zigbee 3.0 and Thread networks
  • RISC-V core runs ESP-IDF, Arduino and MicroPython code
  • USB Type-C port simplifies power and programming

Tekniset tiedot

BrandLORDWORLD

Kysymyksiä tästä tuotteesta

How much power does the ESP32-C5-Zero draw when its Wi-Fi 6 and Bluetooth 5 radios run continuously?

The board is powered through its USB Type-C port and the ESP32-C5 chip is designed for efficient wireless transmission in IoT applications, keeping consumption low during all-day operation.

What host equipment is needed to program the ESP32-C5-Zero over its USB Type-C connection?

A computer with a USB Type-C cable and the ESP-IDF, Arduino IDE or MicroPython toolchain installed is all that is required to start development.

Can the ESP32-C5-Zero coexist with older 2.4 GHz Zigbee 3.0 or Thread devices on the same network?

Yes, its IEEE 802.15.4 radio supports Zigbee 3.0 and Thread alongside dual-band Wi-Fi 6, so it can communicate with legacy 2.4 GHz mesh nodes.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.