Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Small green circuit board with USB-C connector and pin headers

LORDWORLD

LORDWORLD ESP32-C5-Zero Mini Dual-Band Wi-Fi 6 Development Board

SKU CH-9WAY-0TTGT

Compact IoT board with dual-band Wi-Fi 6, Bluetooth 5, Zigbee 3.0 and Thread on a RISC-V MCU

  • Dual-band Wi-Fi 6 covers 2.4 and 5 GHz
  • Bluetooth 5 low energy extends battery life for sensors
  • IEEE 802.15.4 radio enables Zigbee 3.0 and Thread networks
  • RISC-V core runs ESP-IDF, Arduino and MicroPython code
  • USB Type-C port simplifies power and programming

ESP32-C5 RISC-V MCU for IoT

This board integrates an ESP32-C5 RISC-V microcontroller with dual-band Wi-Fi 6, Bluetooth 5 (LE) and IEEE 802.15.4 radio supporting Zigbee 3.0 and Thread. It provides multi-function GPIO pins and a USB Type-C port for power and programming. The platform targets makers and engineers building compact wireless IoT nodes.

Suited for multi-protocol wireless projects

Developers who need simultaneous 2.4 GHz and 5 GHz Wi-Fi 6 alongside Bluetooth LE and 802.15.4 mesh in a small form factor will find this board convenient. It supports ESP-IDF, Arduino and MicroPython with SDKs and tutorials to accelerate prototyping. Projects that require only single-band 2.4 GHz connectivity or lack a USB-C host port should consider other options.

Dual-band Wi-Fi 6 with 802.15.4 mesh

The defining specification is the combined dual-band Wi-Fi 6 and IEEE 802.15.4 radio enabling Zigbee 3.0 and Thread on one chip. This single feature determines whether the board matches a design that needs both high-throughput Wi-Fi 6 and low-power mesh networking. Without that dual-protocol requirement a simpler module may suffice.

Puncte forte

  • Dual-band Wi-Fi 6 covers 2.4 and 5 GHz
  • Bluetooth 5 low energy extends battery life for sensors
  • IEEE 802.15.4 radio enables Zigbee 3.0 and Thread networks
  • RISC-V core runs ESP-IDF, Arduino and MicroPython code
  • USB Type-C port simplifies power and programming

Specificații

BrandLORDWORLD

Întrebări despre acest articol

How much power does the ESP32-C5-Zero draw when its Wi-Fi 6 and Bluetooth 5 radios run continuously?

The board is powered through its USB Type-C port and the ESP32-C5 chip is designed for efficient wireless transmission in IoT applications, keeping consumption low during all-day operation.

What host equipment is needed to program the ESP32-C5-Zero over its USB Type-C connection?

A computer with a USB Type-C cable and the ESP-IDF, Arduino IDE or MicroPython toolchain installed is all that is required to start development.

Can the ESP32-C5-Zero coexist with older 2.4 GHz Zigbee 3.0 or Thread devices on the same network?

Yes, its IEEE 802.15.4 radio supports Zigbee 3.0 and Thread alongside dual-band Wi-Fi 6, so it can communicate with legacy 2.4 GHz mesh nodes.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.