Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään

LORDWORLD

LORDWORLD PCI-E 1x to USB 3.1 Header Adapter VL805

SKU CH-GN5E-EPDW7

Converts a PCI-E 1x slot into a USB 3.1 header for front-panel Type-E ports at up to 5 Gbit/s

  • Adds a USB 3.1 front-panel header via a spare PCI-E 1x slot
  • Delivers up to 5 Gbit/s throughput with the VL805 controller
  • Works with any existing USB 3.0 motherboard header
  • Compact card installs directly without extra cables or brackets
  • Enables USB 3.1 on cases whose board lacks a native header

PCI-E 1x to USB 3.1 Header Adapter

This adapter converts an available PCI-E 1x slot into a USB 3.1 header. It enables front-panel USB 3.1 ports on a chassis when the motherboard lacks a native header. The compact VL805 card plugs directly into the slot and requires no extra cables or brackets.

Builders adding front-panel USB 3.1

Suits system builders who have a free PCI-E 1x slot and need to connect a case USB 3.1 front-panel connector. Not for buyers who need more than one header or who require an internal USB 3.0 header instead of the 3.1 type-E connector.

5 Gbit/s via VL805 controller

The VL805 controller delivers up to 5 Gbit/s over the USB 3.1 header. The card fits any standard USB 3.0 header on the motherboard and bundles the connection into a single USB 3.1 interface.

Kohokohdat

  • Adds a USB 3.1 front-panel header via a spare PCI-E 1x slot
  • Delivers up to 5 Gbit/s throughput with the VL805 controller
  • Works with any existing USB 3.0 motherboard header
  • Compact card installs directly without extra cables or brackets
  • Enables USB 3.1 on cases whose board lacks a native header

Tekniset tiedot

BrandLORDWORLD

Kysymyksiä tästä tuotteesta

How do I install the VL805 adapter into a PCI-E 1x slot and connect the front panel?

Insert the card directly into any free PCI-E 1x slot on the motherboard, then plug the case front-panel cable into the on-board USB 3.1 header; the keyed connector prevents reversed insertion, which is the step most often missed.

What maintenance or replacement will the VL805 adapter need over time?

No scheduled maintenance is required; the solid-state controller has no moving parts, so only a physical failure or a motherboard upgrade would prompt replacement.

What throughput limit appears first when the VL805 adapter runs sustained transfers?

The PCI-E 1x host link and the VL805 controller both top out at 5 Gbit/s, so that bus ceiling is the first bottleneck during continuous high-load traffic.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.