Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Small green circuit board with PCIe x1 edge connector and internal USB 3.1 Type-E header

LORDWORLD

LORDWORLD PCI-E 1x to USB 3.1 Header Adapter VL805

SKU CH-GN5E-EPDW7

Converts a PCI-E 1x slot into a USB 3.1 header for front-panel Type-E ports at up to 5 Gbit/s

  • Adds a USB 3.1 front-panel header via a spare PCI-E 1x slot
  • Delivers up to 5 Gbit/s throughput with the VL805 controller
  • Works with any existing USB 3.0 motherboard header
  • Compact card installs directly without extra cables or brackets
  • Enables USB 3.1 on cases whose board lacks a native header

PCI-E 1x to USB 3.1 Header Adapter

This adapter converts an available PCI-E 1x slot into a USB 3.1 header. It enables front-panel USB 3.1 ports on a chassis when the motherboard lacks a native header. The compact VL805 card plugs directly into the slot and requires no extra cables or brackets.

Builders adding front-panel USB 3.1

Suits system builders who have a free PCI-E 1x slot and need to connect a case USB 3.1 front-panel connector. Not for buyers who need more than one header or who require an internal USB 3.0 header instead of the 3.1 type-E connector.

5 Gbit/s via VL805 controller

The VL805 controller delivers up to 5 Gbit/s over the USB 3.1 header. The card fits any standard USB 3.0 header on the motherboard and bundles the connection into a single USB 3.1 interface.

Prednosti

  • Adds a USB 3.1 front-panel header via a spare PCI-E 1x slot
  • Delivers up to 5 Gbit/s throughput with the VL805 controller
  • Works with any existing USB 3.0 motherboard header
  • Compact card installs directly without extra cables or brackets
  • Enables USB 3.1 on cases whose board lacks a native header

Špecifikácie

BrandLORDWORLD

Otázky k tomuto produktu

How do I install the VL805 adapter into a PCI-E 1x slot and connect the front panel?

Insert the card directly into any free PCI-E 1x slot on the motherboard, then plug the case front-panel cable into the on-board USB 3.1 header; the keyed connector prevents reversed insertion, which is the step most often missed.

What maintenance or replacement will the VL805 adapter need over time?

No scheduled maintenance is required; the solid-state controller has no moving parts, so only a physical failure or a motherboard upgrade would prompt replacement.

What throughput limit appears first when the VL805 adapter runs sustained transfers?

The PCI-E 1x host link and the VL805 controller both top out at 5 Gbit/s, so that bus ceiling is the first bottleneck during continuous high-load traffic.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.