Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Small rectangular board with 40-pin GPIO header and Ethernet socket

LORDWORLD

LORDWORLD PoE HAT (H) for Raspberry Pi 5/CM5 5V 5A 40-PIN

SKU CH-NF3R-F29C8

Powers Raspberry Pi 5 or CM5 through a single Ethernet cable using IEEE 802.3 af/at PoE, delivering 5 V 5 A via an isolated SMPS and a 40-pin GPIO header that fits the official case and active cooler

  • Power via single Ethernet cable using IEEE 802.3af/at PoE
  • Reliable 5V 5A output from isolated switched-mode supply
  • Fits official Pi 5 case and active cooler
  • Standard 40-pin GPIO header for plug-and-play setup
  • Combines power and data for IoT and robotics projects

IEEE 802.3 PoE HAT for Raspberry Pi 5 and CM5

This PoE HAT powers a Raspberry Pi 5 or Compute Module 5 through a single Ethernet cable connected to a PoE-enabled switch or router. It draws power and data over IEEE 802.3 af/at compliant infrastructure. The board suits makers, robotics hobbyists and IoT developers who want a tidy, cable-free deployment. It plugs directly onto the 40-pin GPIO header for immediate use.

5 V 5 A isolated SMPS output

The isolated switched-mode supply delivers a steady 5 V at up to 5 A, giving the Pi 5 enough current for its own operation plus attached HATs, cameras or USB devices. Headroom exists for typical sensor arrays and small actuators in robotics or edge-computing nodes. Very high-draw peripherals such as large touchscreen displays or multiple spinning drives may exceed the available budget.

Replaces separate power supply

The HAT removes the need for a dedicated USB-C power adapter and its mains lead when a PoE switch is already present. It also fits inside the official Pi 5 case and clears the Active Cooler, so existing enclosures need no modification. The upgrade is worthwhile wherever Ethernet cabling reaches the device location; it adds no benefit in purely Wi-Fi or battery-powered installations.

Kohokohdat

  • Power via single Ethernet cable using IEEE 802.3af/at PoE
  • Reliable 5V 5A output from isolated switched-mode supply
  • Fits official Pi 5 case and active cooler
  • Standard 40-pin GPIO header for plug-and-play setup
  • Combines power and data for IoT and robotics projects

Tekniset tiedot

BrandLORDWORLD

Kysymyksiä tästä tuotteesta

Will this 40-PIN HAT fit inside the official Raspberry Pi 5 case I already own?

Yes, the HAT is designed to fit perfectly into the official Raspberry Pi 5 case without modification.

How can I verify the 5V 5A output is working correctly after I connect the Ethernet cable?

The Pi 5 should boot reliably under load and report stable voltage via software monitoring tools when powered through the HAT.

Does the box include the Raspberry Pi 5 board or the official case, or must I buy them separately?

The HAT is supplied alone; the Raspberry Pi 5 or CM5 board and the official case are separate purchases.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.