Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Green PCB network card with silver SC fiber port and low-profile bracket

LR-LINK

LR-LINK LREC6230PF-LX Gigabit Single-port Fiber Network Card

SKU CH-Q552-EWQYW

Adds a single 1000 Mbps fibre port via PCIe x1 using an Intel I210 controller with an SC connector for long-range links

  • Standards802.3az
  • Speed1000Mbps
  • Connectors1 x SC
  • InterfacePCI-Express
  • Temperature0°C ~ 55°C
  • Humidity0 % ~ 90 % (Non-condensing)

Ports 1x SC single-mode

Option LREC6230PF-LX

  • Gigabit fibre link for secure long-distance networks with Intel I210 controller
  • PCIe 2.1 x1 interface delivers 1000Mbps throughput without bus bottleneck
  • Single-mode SC connector supports 30-year fibre lifespan and EMI immunity
  • Energy-efficient 802.3az compliance lowers power draw during idle periods
  • Operates reliably from 0°C to 55°C at up to 90% humidity

Single-port 1000BASE-LX fiber adapter

The LR-LINK LREC6230PF-LX is a PCIe x1 Gigabit Ethernet card built on the Intel I210 controller. It provides one SC connector for single-mode fibre, suited to desktop or server systems that need a dedicated 1000 Mbps optical link. Low-profile and full-height brackets are included for flexible mounting.

Upgrade from copper or 100 Mbps fibre

This card replaces a copper Gigabit NIC or an older 100 Mbps fibre adapter such as the 82574-based 9030 series. The jump is worthwhile when electromagnetic immunity, lightning protection or a 30-year fibre lifespan are required, and when the PCIe 2.1 x1 slot can supply 2.5 GT/s bandwidth.

Handles secure long-haul links; limited to one port

The adapter comfortably serves FTTD deployments, medical equipment and high-security environments operating between 0 °C and 55 °C with up to 90 % humidity. It runs out of headroom when a second fibre port or multi-mode connectivity is needed, as the design is single-port single-mode only.

Kohokohdat

  • Gigabit fibre link for secure long-distance networks with Intel I210 controller
  • PCIe 2.1 x1 interface delivers 1000Mbps throughput without bus bottleneck
  • Single-mode SC connector supports 30-year fibre lifespan and EMI immunity
  • Energy-efficient 802.3az compliance lowers power draw during idle periods
  • Operates reliably from 0°C to 55°C at up to 90% humidity

Tekniset tiedot

BrandLR-LINK
ModelLREC6230PF-LX
Standards802.3az
Speed1000Mbps
Connectors1 x SC
InterfacePCI-Express
Temperature0°C ~ 55°C
Humidity0 % ~ 90 % (Non-condensing)

Tämän mallin muut versiot

2 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

Does the card fit a low-profile chassis or do I need the full-height bracket?

Both a low-profile bracket and a full-height bracket are included so you can choose the one that matches your case.

The card uses a PCIe 2.1 x1 slot — do I need to enable anything in BIOS for it to be detected?

Enable the PCIe slot in BIOS and set the link speed to Gen 2 if it defaults to Gen 1; the Intel I210 controller then initialises without extra drivers on most modern operating systems.

The SC single-mode connector is rated for a 30-year fibre lifespan — what maintenance does the link need?

Inspect and clean the SC ferrule with a lint-free wipe and isopropyl alcohol whenever you reconnect the patch cord; no other scheduled maintenance is required.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.