MAIWO
MAIWO K3016CL M.2 SATA/NVMe Docking Station USB C 10Gbps Clone Duplicator SD Express Card Base
Dual-bay M.2 dock clones SATA and NVMe drives offline and adds an SD Express card slot for simultaneous read, write and copy at 10Gbps over USB-C
- ColorGray
- TypeDock
- AC AdapterYes
- Materialabs plastic
- External InterfaceUSB 3.1 Type-C
- HDD Count SupportedWith Clone
External Interface USB 3.1 Type-C
- USB 3.1 Type-C
- USB 3.2 Gen 2
HDD Supported With Clone
- Single NVMe SSD
- With Clone
Size M.2 SATA&NVMe SSD
- M.2 NVME SSD
- M.2 SATA&NVMe SSD
Yliviivatut versiot ovat olemassa, mutta niitä ei ole varastossa täällä.
- One-key offline clone without a PC
- 10 Gbps USB 3.1 Gen 2 transfer speed
- Reads NVMe and SATA M.2 SSDs simultaneously
- Supports SD Express 7.0 and 7.1 cards
- Works with Windows, Mac and Linux
Dual-bay M.2 dock with SD Express base
The MAIWO K3016CL accepts two M.2 drives and one SD Express card at the same time. It handles SATA and NVMe protocols across the M.2 slots and reads SD cards of version 7.0 and 7.1. The unit connects to a host through a USB 3.1 Gen 2 Type-C port running at 10Gbps. No driver installation is required on Windows, Linux or Mac OS.
Standalone cloning frees the host system
Offline copy runs without a computer attached; press the single button to start one of four modes: NVMe to SATA, SATA to NVMe, SD to NVMe or SD to SATA. An indicator LED shows progress while the source and target drives sit in the two M.2 bays or the SD slot. A 5V/3A adapter powers the dock so the host USB port only carries data. The same hardware also works as a regular external enclosure when plugged into a PC, phone or console that supports OTG.
Passive cooling sustains long transfers
The ABS chassis relies on bottom ventilation holes instead of a fan, so airflow depends on the surface underneath. During extended clone jobs or large file moves the drives sit in open bays with direct exposure to that passive airflow. The external power brick keeps voltage stable for both M.2 slots and the SD slot simultaneously, preventing throttling that can occur on bus-powered hubs.
Kohokohdat
- One-key offline clone without a PC
- 10 Gbps USB 3.1 Gen 2 transfer speed
- Reads NVMe and SATA M.2 SSDs simultaneously
- Supports SD Express 7.0 and 7.1 cards
- Works with Windows, Mac and Linux
Tekniset tiedot
| Brand | MAIWO |
|---|---|
| Model | K3016CL |
| Color | Gray |
| Type | Dock |
| AC Adapter | Yes |
| Material | abs plastic |
| External Interface | USB 3.1 Type-C |
| HDD Count Supported | With Clone |
| Number of Bay | 2 Bay |
| Fan | No |
| Power | 5V/3A |
| Specifications | 【One-key offline clone】One port is SATA , one port is NVMe,one port is SDExpress.Support 4 clone modes:NVMe to SATA / SATA to NVMe/ SD to NVMe / SD to SATA 【High speed and easy to use】USB 3.1 (Gen2) Type-C interface with a high-speed transfer rate of up to 10Gbps. No need any tools. support plug & play. LED indicator lets you know the working status easily. |
| Operating Systems Supported | Windows/Linux/Mac OS |
| Features | 【 Power adapter】The 5V-3A power adapter which can make your M.2 SSDs run more quickly and stably, stable and reliable power source guarantees a steady supply of energy. 【Efficient Heat Dissipation】Bottom cooling hole design, better protection of hard disk, better dissipation performance, effectively extend the lifetime of SSD. Equipped with non-slip silicone pad to be more stable on the table 【Wide compatibility】This hard drive duplicator for M.2 SATA SSD, M.2 NVME SSD and SD Express 7.0/7.1 card, Supports 2 M.2 SSD reads and writes at the same time; Compatible with Windows /Mac /Lin |
| Dimensions | 3.09 * 3.01 * 0.75 inch |
| Weight | 5.11 oz |
| Package Contents | 1 x Dual Bay Docking Station; 1 x 5V 3A Power Adapter; 2 x Cable(C to C Data cable,C to A Power line). |
Tämän mallin muut versiot
1 lisää samasta mallistosta
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
Kysymyksiä tästä tuotteesta
How much total SSD capacity can the K3016CL handle across its two M.2 slots and SD Express slot?
The dock supports up to 2 TB per M.2 slot and 4 TB on the SD Express slot for a combined 8 TB maximum.
Does the enclosure include active cooling for sustained all-day transfers?
There is no fan; heat escapes through bottom ventilation holes and the ABS plastic chassis.
What power source must be connected for the dock to operate?
The included 5 V / 3 A AC adapter plugs into the unit and supplies all power for the drives and cloning functions.
Myös tällä osastolla
Asiakkaat vertailivat myös näitä
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
