Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
White enclosed FDM printer with touchscreen and camera, 547mm tall

MakerBot

MakerBot Sketch Standard 3D Printer 150mm build 1.75mm filament

SKU CH-WDHP-C518D

FDM printer with a 150 mm enclosed build volume, heated flexible plate, replaceable extruder, on-board camera, touchscreen, Wi-Fi, Ethernet, USB, and bundled PLA plus educator certifications

  • Type3D Printer
  • TechnologyFDM (Fused Deposition Modeling)
  • Build Size150mm x 150mm x 150mm (5.9 x 5.9 x 5.9 inches)
  • Filament Diameter1.75 mm (0.069 inches)
  • ConnectivityUSB, Ethernet, Wifi
  • Operation System RequirementsWindows (7, 10)Mac OS X (10.12+) Note: Does not support Mac

Model Sketch Standard

Option One-Printer Setup

  • 150 mm build volume fits small projects
  • 75 mm PLA filament included for immediate printing
  • USB, Ethernet and Wi-Fi connectivity for flexible placement
  • Enclosed chamber with particulate filter for safer classroom use
  • CloudPrint software and 600 certified lesson plans support remote teaching

Classroom FDM Printer

The MakerBot Sketch Standard is a fused deposition modelling printer built for education environments. It offers a 150mm cubed build volume and accepts 1.75mm PLA filament. The system runs on Windows 7 or 10 and Mac OS X 10.12, though Catalina is not supported. CloudPrint software manages print jobs across a network.

Enclosed Frame With Flexible Plate

A fully enclosed chassis houses a particulate filter for cleaner air during operation. The heated build plate is flexible to ease part removal and two plates are included in the box. A replaceable extruder module simplifies maintenance when a nozzle wears out. Connectivity covers USB, Ethernet and Wi-Fi for wired or wireless job submission.

Touchscreen Control And Onboard Camera

A full colour touchscreen provides direct access to printer functions without a host computer. An integrated camera lets teachers monitor progress remotely through the CloudPrint portal. Power input accepts 100 to 240 volts at 50 to 60 hertz, drawing between 1.3 and 2.7 amps. The unit weighs 11.8kg and measures 547mm high by 535mm wide by 470mm deep.

Kohokohdat

  • 150 mm build volume fits small projects
  • 75 mm PLA filament included for immediate printing
  • USB, Ethernet and Wi-Fi connectivity for flexible placement
  • Enclosed chamber with particulate filter for safer classroom use
  • CloudPrint software and 600 certified lesson plans support remote teaching

Tekniset tiedot

BrandMakerbot
Type3D Printer
TechnologyFDM (Fused Deposition Modeling)
Build Size150mm x 150mm x 150mm
(5.9 x 5.9 x 5.9 inches)
Filament Diameter1.75 mm (0.069 inches)
ConnectivityUSB, Ethernet, Wifi
Operation System RequirementsWindows (7, 10)Mac OS X (10.12+)
Note: Does not support Mac Catalina
Software BundleMakerBot CloudPrint
Power Requirements100--240 V, 50-60 HZ2.7-1.3A
FeaturesGENERAL
Layer Resolution: 100-400 microns (0.0039 - 0.0157 inches), Print mode tuned for 200 microns
Material Compatibility: MakerBot Sketch PLA Material
Extruder Compatibility: MakerBot Sketch Extruder
Nozzle Diameter: 0.4 mm (0.015 inches)
Print File Type: .MAKERBOT
MECHANICAL
Build Surface: Grip Surface
Build Plate Leveling: Heated with removable flexible build surface
CAMERA
Camera resolution: 2 megapixels
Package Contents(1) Sketch Printer
(2) Large Spools of PLA (1 Kg)
(1) Small Spool of PLA (0.25 Kg)
(2) Build Plates
(1) Spatula
(1) Snip
(1) Seat in Teacher Certifications
(5) Seats in Student Certifications
MakerBot Cloud with Print Queuing
1 year warranty
Dimensions547mm (H) x 535mm (W) x 470mm (D)
21.54in (H) x 21.07in (W) x 18.5in (D
Weight11.8 kg (26 lb)
Lähetyspaino21.26 kg
Pakkauksen mitat597 × 594 × 591 mm

Tämän mallin muut versiot

3 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

What connectivity options does the MakerBot Sketch Standard offer and what operating systems can it run on?

It connects via USB, Ethernet or Wi-Fi and works with Windows 7 or 10 and macOS 10.12 or later, though macOS Catalina is not supported.

What are the printer's dimensions and weight, and what space does it need to sit securely?

The unit measures 547 mm high, 535 mm wide and 470 mm deep and weighs 11.8 kg, so it needs a sturdy bench at least 535 mm wide by 470 mm deep.

How is the MakerBot Sketch Standard set up for the first print and what step do users often miss?

Unbox the printer, load one of the included PLA spools, level the flexible heated build plate, connect to MakerBot CloudPrint via USB, Ethernet or Wi-Fi, then send a sliced file; the step most often missed is running the bed-level calibration before the first print.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.