Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Silver 3.5 inch bare hard drive with green circuit board visible

Maxtor

Maxtor DiamondMax 10 6L160M0 160GB 7200 RPM 8MB SATA 1.5Gb/s 3.5" internal hard drive

SKU CH-103A-1W56B MPN 6L160M0

A 160GB 7200 RPM desktop hard drive with 8MB cache and SATA 1.5Gb/s interface

  • PackagingBare Drive
  • InterfaceSATA 1.5Gb/s
  • Capacity160GB
  • RPM7200 RPM
  • Cache8MB
  • Average Seek Time9ms
  • 7200 RPM spindle speed delivers responsive desktop performance
  • 8 MB cache buffers bursts for smoother multitasking
  • SATA 1.5 Gb/s interface connects to legacy motherboards
  • Fluid dynamic bearing motor reduces acoustic noise
  • Shock and Data Protection Systems guard stored files

Maxtor DiamondMax 10 160GB Desktop Drive

This Maxtor DiamondMax 10 model 6L160M0 is a 3.5 inch internal hard drive with 160GB capacity. It spins at 7200 RPM and includes 8MB cache on a SATA 1.5Gb/s interface. The bare drive suits desktop storage upgrades or legacy system repairs.

Suits Legacy SATA Builds Not Modern High Capacity

Builders maintaining older desktops that require a SATA 1.5Gb/s drive will find this unit matches the original specification. It is not for users who need larger capacities or faster interfaces for current workloads. The 9ms average seek time and 4.17ms latency reflect the drive's generation.

SATA 1.5Gb/s Interface Decides Compatibility

The single specification that decides fit is the SATA 1.5Gb/s interface. Your motherboard or controller must support this revision for the drive to operate. Native command queuing and the fluid dynamic bearing motor are included features.

Kohokohdat

  • 7200 RPM spindle speed delivers responsive desktop performance
  • 8 MB cache buffers bursts for smoother multitasking
  • SATA 1.5 Gb/s interface connects to legacy motherboards
  • Fluid dynamic bearing motor reduces acoustic noise
  • Shock and Data Protection Systems guard stored files

Tekniset tiedot

BrandMaxtor
SeriesDiamondMax 10
Model6L160M0
PackagingBare Drive
InterfaceSATA 1.5Gb/s
Capacity160GB
RPM7200 RPM
Cache8MB
Average Seek Time9ms
Average Latency4.17ms
FeaturesRoHS Comliant
Native command queuing
Fluid dynamic bearing motor for quiet operation
Improved reliability with:
Shock Protection System
Data Protection System
Form Factor3.5"
Lähetyspaino0.67 kg
Pakkauksen mitat203 × 152 × 51 mm

Kysymyksiä tästä tuotteesta

Will the DiamondMax 10 6L160M0 work on an older motherboard that only has SATA 1.5Gb/s ports?

Yes, the drive uses the SATA 1.5Gb/s interface so it will operate at its native speed on those ports without any adapter or jumper changes.

How can I verify the 7200 RPM drive is performing correctly after installation?

Check the BIOS or operating system device manager to confirm the model 6L160M0 is detected at 160GB capacity and run a SMART health test to ensure no read or seek errors appear.

Does the bare-drive package include a SATA data cable or mounting screws for a 3.5-inch bay?

No, the bare drive includes only the hard drive itself; you must supply your own SATA data cable, power connector and 3.5-inch mounting screws.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.