Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Silver 3.5 inch SATA hard drive bare unit

Maxtor

Maxtor MaXLine III 7V250F0 250GB 7200 RPM 16MB SATA 3.0Gb/s 3.5" internal hard drive

SKU CH-BSPF-18G7W MPN 7V250F0

A 250 GB 3.5-inch desktop drive with 7200 RPM, 16 MB cache and SATA 3.0Gb/s interface

  • PackagingBare Drive
  • InterfaceSATA 3.0Gb/s
  • Capacity250GB
  • RPM7200 RPM
  • Cache16MB
  • Average Seek Time9ms
  • 7200 RPM spindle speed delivers responsive desktop performance
  • 16 MB cache buffers bursts for smoother multitasking
  • 250 GB capacity stores OS, apps and media
  • SATA 3.0 Gb/s interface fits standard motherboards
  • Native command queuing improves random read throughput

Maxtor MaXLine III 250GB Desktop Drive

The Maxtor MaXLine III 7V250F0 is a 250GB 3.5-inch internal hard drive built for desktop computers. It operates at 7200 RPM with a 16MB cache and connects via a SATA 3.0Gb/s interface. This bare drive delivers 9ms average seek time and 4.17ms average latency for standard desktop storage tasks. It includes native command queuing for improved random read performance.

Suits legacy desktop upgrades not high-capacity

This drive fits older desktop systems requiring a SATA 3.0Gb/s connection and 250GB of storage. It works for replacing a failed boot drive or adding secondary storage where capacity demands are modest. Builders needing terabytes of space or faster solid-state performance should consider other storage types. The bare drive packaging means no cables or mounting hardware are included.

SATA 3.0Gb/s interface determines compatibility

The single specification that decides fit is the SATA 3.0Gb/s interface. Your motherboard or controller must provide a matching SATA data port and power connector. The 3.5-inch form factor requires a standard drive bay. Verify your system supports this interface before purchase.

Kohokohdat

  • 7200 RPM spindle speed delivers responsive desktop performance
  • 16 MB cache buffers bursts for smoother multitasking
  • 250 GB capacity stores OS, apps and media
  • SATA 3.0 Gb/s interface fits standard motherboards
  • Native command queuing improves random read throughput

Tekniset tiedot

BrandMaxtor
SeriesMaXLine III
Model7V250F0
PackagingBare Drive
InterfaceSATA 3.0Gb/s
Capacity250GB
RPM7200 RPM
Cache16MB
Average Seek Time9ms
Average Latency4.17ms
FeaturesNative command queuing for 2X improved random read performance over previous generation MaXLine
12.5 rad/sec2 rotational vibration
RoHS compliant
Form Factor3.5"
Lähetyspaino0.68 kg
Pakkauksen mitat203 × 152 × 51 mm

Kysymyksiä tästä tuotteesta

How do I install this 3.5" SATA drive in a desktop PC, and what step is often missed?

Mount the drive in a 3.5" bay using four screws, connect the SATA data cable to a motherboard port and the SATA power cable from the PSU, then enable the drive in BIOS — many forget the BIOS step.

What maintenance or replacement will this 250GB MaXLine III drive need later?

No routine maintenance is required; the mechanical parts will eventually wear out, so plan to replace the drive when SMART attributes report reallocated sectors or seek errors.

What limit appears first on this 7200 RPM drive during sustained heavy writes?

The 16MB cache fills quickly under sustained writes, forcing the drive to throttle to the platters' native speed and increasing average latency beyond 4.17ms.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.