Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Green rectangular circuit board with pin headers and USB-C port

MCDODO

MCDODO ESP32-C6-DevKitC-1-N8 Development Board

SKU CH-AVTK-6B0PF

A development board with a 32-bit RISC-V MCU, 2.4 GHz Wi-Fi 6 and Bluetooth 5 (LE) for IoT edge prototyping

  • TypeSingle Board Computers
  • 32-bit RISC-V MCU powers efficient IoT edge computing
  • 4 GHz Wi-Fi 6 enables fast wireless connectivity
  • Bluetooth 5 LE supports low-energy peripheral links
  • IEEE 802.15 compatibility allows mesh network integration
  • USB SDK with ESP-IDF accelerates firmware development

Purpose-built IoT prototyping board

The MCDODO ESP32-C6-DevKitC-1-N8 is a single-board computer designed for makers developing connected devices. It integrates a 32-bit RISC-V microcontroller with 2.4 GHz Wi-Fi 6 and Bluetooth 5 (LE) radios. The board targets engineers who need an IEEE 802.15 compatible platform for edge applications.

Integration into a custom build

The board connects to a host PC via USB for power, programming and serial debugging using the ESP-IDF framework. Its onboard radios remove the need for separate wireless modules when adding network connectivity. Header pins expose GPIO for sensors, actuators or additional peripherals.

Bundled software impact

The USB SDK supplies ESP-IDF source code and example applications that accelerate firmware development. These resources let developers test Wi-Fi 6 and Bluetooth 5 features immediately without writing drivers from scratch. The examples cover common IoT protocols supported by the hardware.

Kohokohdat

  • 32-bit RISC-V MCU powers efficient IoT edge computing
  • 4 GHz Wi-Fi 6 enables fast wireless connectivity
  • Bluetooth 5 LE supports low-energy peripheral links
  • IEEE 802.15 compatibility allows mesh network integration
  • USB SDK with ESP-IDF accelerates firmware development

Tekniset tiedot

TypeSingle Board Computers

Kysymyksiä tästä tuotteesta

How much power does the 32-bit RISC-V MCU draw under continuous load?

The board runs on USB power and the 32-bit RISC-V MCU is designed for low-power IoT edge workloads, drawing minimal current during sustained operation.

Does the board get hot or noisy when Wi-Fi 6 and Bluetooth 5 run all day?

No active cooling is fitted; the compact PCB stays cool and silent during typical 2.4 GHz wireless activity.

What host computer and cable are needed to start developing with the ESP-IDF SDK?

A PC with a USB port and a standard USB cable are required to flash code via the ESP-IDF toolchain.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.