Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Green rectangular circuit board with pin headers and USB-C port

MCDODO

MCDODO ESP32-C6-DevKitC-1-N8 Development Board

SKU CH-AVTK-6B0PF

A development board with a 32-bit RISC-V MCU, 2.4 GHz Wi-Fi 6 and Bluetooth 5 (LE) for IoT edge prototyping

  • TypeSingle Board Computers
  • 32-bit RISC-V MCU powers efficient IoT edge computing
  • 4 GHz Wi-Fi 6 enables fast wireless connectivity
  • Bluetooth 5 LE supports low-energy peripheral links
  • IEEE 802.15 compatibility allows mesh network integration
  • USB SDK with ESP-IDF accelerates firmware development

Purpose-built IoT prototyping board

The MCDODO ESP32-C6-DevKitC-1-N8 is a single-board computer designed for makers developing connected devices. It integrates a 32-bit RISC-V microcontroller with 2.4 GHz Wi-Fi 6 and Bluetooth 5 (LE) radios. The board targets engineers who need an IEEE 802.15 compatible platform for edge applications.

Integration into a custom build

The board connects to a host PC via USB for power, programming and serial debugging using the ESP-IDF framework. Its onboard radios remove the need for separate wireless modules when adding network connectivity. Header pins expose GPIO for sensors, actuators or additional peripherals.

Bundled software impact

The USB SDK supplies ESP-IDF source code and example applications that accelerate firmware development. These resources let developers test Wi-Fi 6 and Bluetooth 5 features immediately without writing drivers from scratch. The examples cover common IoT protocols supported by the hardware.

Pluspunten

  • 32-bit RISC-V MCU powers efficient IoT edge computing
  • 4 GHz Wi-Fi 6 enables fast wireless connectivity
  • Bluetooth 5 LE supports low-energy peripheral links
  • IEEE 802.15 compatibility allows mesh network integration
  • USB SDK with ESP-IDF accelerates firmware development

Specificaties

TypeSingle Board Computers

Vragen over dit artikel

How much power does the 32-bit RISC-V MCU draw under continuous load?

The board runs on USB power and the 32-bit RISC-V MCU is designed for low-power IoT edge workloads, drawing minimal current during sustained operation.

Does the board get hot or noisy when Wi-Fi 6 and Bluetooth 5 run all day?

No active cooling is fitted; the compact PCB stays cool and silent during typical 2.4 GHz wireless activity.

What host computer and cable are needed to start developing with the ESP-IDF SDK?

A PC with a USB port and a standard USB cable are required to flash code via the ESP-IDF toolchain.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.