Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
White compact wall adapter with Micro-USB cable 3.3 feet long

MCDODO

MCDODO Raspberry Pi Power Supply 5V 3A Micro-USB 3.3ft

SKU CH-QYNC-SR5RG

A 5V 3A Micro-USB power adapter with 3.3ft cable and built-in short-circuit, over-current, over-voltage and over-temperature protection for Raspberry Pi boards

  • TypeSingle Board Computers
  • Delivers stable 5 V 3 A output for reliable Pi operation
  • 3 ft cable gives flexible placement on the bench
  • 100–240 V 50/60 Hz input works worldwide without a converter
  • Built-in short-circuit, over-current, over-voltage and over-temperature protection safeguards hardware
  • Micro-USB connector fits Pi 3 B+, Pi 2 B, Pi Zero, Model A, A+, B and B+

Power Supply for Raspberry Pi Boards

This 5 V 3 A adapter is built for Raspberry Pi 3 B+, Pi 2 B, Pi Zero and Model A, A+, B, B+ boards. It delivers stable DC power through a fixed Micro-USB plug. The unit accepts 100 V to 240 V input at 50 Hz or 60 Hz, making it suitable for worldwide mains voltages.

Safety Protection Built In

The supply includes short-circuit, over-current, over-voltage and over-temperature safeguards that cut power automatically during a fault. These protections prevent damage to the connected board and reduce the risk of component failure during prolonged use. No extra software or configuration is required.

Fixed Cable and Connector

A 3.3 ft (100 cm) Micro-USB cable is permanently attached, so there is no separate lead to lose or misplace. The length allows the board to sit on a bench or inside a case while the adapter reaches a wall socket or power strip. The connector fits only boards with a Micro-USB power port.

Kohokohdat

  • Delivers stable 5 V 3 A output for reliable Pi operation
  • 3 ft cable gives flexible placement on the bench
  • 100–240 V 50/60 Hz input works worldwide without a converter
  • Built-in short-circuit, over-current, over-voltage and over-temperature protection safeguards hardware
  • Micro-USB connector fits Pi 3 B+, Pi 2 B, Pi Zero, Model A, A+, B and B+

Tekniset tiedot

TypeSingle Board Computers

Kysymyksiä tästä tuotteesta

Will the Micro-USB plug or the 3.3ft cable need replacing before the power supply itself fails?

The Micro-USB connector and 3.3ft cable are fixed to the unit; they cannot be swapped separately. If the plug wears or the cable frays, the whole adapter must be replaced.

Which protection limit activates first during continuous 3A load — over-current or over-temperature?

Built-in safeguards include short-circuit, over-current, over-voltage and over-temperature protection. The adapter will trip whichever threshold is reached first under sustained load.

How warm does the brick get and is there any fan noise when it runs 24/7 at 5V 3A?

The unit has no fan, so it runs silently. Heat rises until the over-temperature protection engages, but no surface-temperature figure is published.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.