Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
White compact wall adapter with Micro-USB cable 3.3 feet long

MCDODO

MCDODO Raspberry Pi Power Supply 5V 3A Micro-USB 3.3ft

SKU CH-QYNC-SR5RG

A 5V 3A Micro-USB power adapter with 3.3ft cable and built-in short-circuit, over-current, over-voltage and over-temperature protection for Raspberry Pi boards

  • TypeSingle Board Computers
  • Delivers stable 5 V 3 A output for reliable Pi operation
  • 3 ft cable gives flexible placement on the bench
  • 100–240 V 50/60 Hz input works worldwide without a converter
  • Built-in short-circuit, over-current, over-voltage and over-temperature protection safeguards hardware
  • Micro-USB connector fits Pi 3 B+, Pi 2 B, Pi Zero, Model A, A+, B and B+

Power Supply for Raspberry Pi Boards

This 5 V 3 A adapter is built for Raspberry Pi 3 B+, Pi 2 B, Pi Zero and Model A, A+, B, B+ boards. It delivers stable DC power through a fixed Micro-USB plug. The unit accepts 100 V to 240 V input at 50 Hz or 60 Hz, making it suitable for worldwide mains voltages.

Safety Protection Built In

The supply includes short-circuit, over-current, over-voltage and over-temperature safeguards that cut power automatically during a fault. These protections prevent damage to the connected board and reduce the risk of component failure during prolonged use. No extra software or configuration is required.

Fixed Cable and Connector

A 3.3 ft (100 cm) Micro-USB cable is permanently attached, so there is no separate lead to lose or misplace. The length allows the board to sit on a bench or inside a case while the adapter reaches a wall socket or power strip. The connector fits only boards with a Micro-USB power port.

Pluspunten

  • Delivers stable 5 V 3 A output for reliable Pi operation
  • 3 ft cable gives flexible placement on the bench
  • 100–240 V 50/60 Hz input works worldwide without a converter
  • Built-in short-circuit, over-current, over-voltage and over-temperature protection safeguards hardware
  • Micro-USB connector fits Pi 3 B+, Pi 2 B, Pi Zero, Model A, A+, B and B+

Specificaties

TypeSingle Board Computers

Vragen over dit artikel

Will the Micro-USB plug or the 3.3ft cable need replacing before the power supply itself fails?

The Micro-USB connector and 3.3ft cable are fixed to the unit; they cannot be swapped separately. If the plug wears or the cable frays, the whole adapter must be replaced.

Which protection limit activates first during continuous 3A load — over-current or over-temperature?

Built-in safeguards include short-circuit, over-current, over-voltage and over-temperature protection. The adapter will trip whichever threshold is reached first under sustained load.

How warm does the brick get and is there any fan noise when it runs 24/7 at 5V 3A?

The unit has no fan, so it runs silently. Heat rises until the over-temperature protection engages, but no surface-temperature figure is published.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.