Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Small green circuit board with a 1.69 inch 240×280 colour screen, WM8960 audio chip, two microphones, a tiny speaker and RGB LEDs

MCDODO

MCDODO Whisplay HAT for Raspberry Pi Zero W/2W 1.69" 240×280 Audio Display Expansion Board

SKU CH-WGR3-M7RSQ

Adds a 1.69-inch 240×280 LCD, WM8960 audio with dual microphones, RGB LEDs and a programmable click button to a Raspberry Pi Zero W or 2W

  • TypeSingle Board Computers
  • 69-inch 240×280 LCD gives clear status readouts at a glance
  • WM8960 audio chip with dual microphones and onboard speaker enables voice projects
  • Matching Raspberry Pi Zero 2W footprint keeps handheld builds compact
  • RGB LEDs provide instant visual feedback for scripts or alerts
  • Programmable click button triggers custom Python actions or mouse events

Compact Display HAT for Pi Zero

The MCDODO Whisplay HAT adds a 1.69-inch colour LCD and WM8960 audio to a Raspberry Pi Zero W or Zero 2 W. Dual on-board microphones and a speaker connector enable voice capture and playback. Four RGB LEDs and a programmable click button provide immediate visual and tactile feedback for handheld projects.

Upgrade from headless or basic GPIO boards

Developers moving from text-only serial consoles or simple LED matrices gain a 240×280 SPI screen and high-performance audio in the same footprint. The jump is worth it when a project needs on-device menus, waveform display or voice interaction without extra cables or separate audio hats.

SPI bandwidth and panel size constrain refresh

The 240×280 panel runs over the Pi Zero SPI bus, so full-screen animation rates are limited by serial throughput. Audio quality depends on the WM8960 codec and external speaker choice; the on-board speaker is suited to alerts, not high-fidelity playback. Projects needing faster video or larger viewing areas require a different display interface.

Kohokohdat

  • 69-inch 240×280 LCD gives clear status readouts at a glance
  • WM8960 audio chip with dual microphones and onboard speaker enables voice projects
  • Matching Raspberry Pi Zero 2W footprint keeps handheld builds compact
  • RGB LEDs provide instant visual feedback for scripts or alerts
  • Programmable click button triggers custom Python actions or mouse events

Tekniset tiedot

TypeSingle Board Computers

Kysymyksiä tästä tuotteesta

Does the HAT share the exact footprint of a Raspberry Pi Zero 2W so it fits inside a standard Zero enclosure?

The board is the same dimension as a Raspberry Pi Zero and is designed to match the Zero 2W perfectly for handheld builds.

Which header pins must be soldered to connect the WM8960 audio chip and the 240×280 SPI display?

The HAT plugs directly onto the 40-pin GPIO header; no extra soldering is required for the audio chip or the SPI display.

Can the onboard speaker be swapped for a larger external one without changing the driver circuit?

The WM8960 amplifier drives both the onboard speaker and an external speaker connector, so a larger speaker can be connected directly.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.