Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Small green circuit board with a 1.69 inch 240×280 colour screen, WM8960 audio chip, two microphones, a tiny speaker and RGB LEDs

MCDODO

MCDODO Whisplay HAT for Raspberry Pi Zero W/2W 1.69" 240×280 Audio Display Expansion Board

SKU CH-WGR3-M7RSQ

Adds a 1.69-inch 240×280 LCD, WM8960 audio with dual microphones, RGB LEDs and a programmable click button to a Raspberry Pi Zero W or 2W

  • TypeSingle Board Computers
  • 69-inch 240×280 LCD gives clear status readouts at a glance
  • WM8960 audio chip with dual microphones and onboard speaker enables voice projects
  • Matching Raspberry Pi Zero 2W footprint keeps handheld builds compact
  • RGB LEDs provide instant visual feedback for scripts or alerts
  • Programmable click button triggers custom Python actions or mouse events

Compact Display HAT for Pi Zero

The MCDODO Whisplay HAT adds a 1.69-inch colour LCD and WM8960 audio to a Raspberry Pi Zero W or Zero 2 W. Dual on-board microphones and a speaker connector enable voice capture and playback. Four RGB LEDs and a programmable click button provide immediate visual and tactile feedback for handheld projects.

Upgrade from headless or basic GPIO boards

Developers moving from text-only serial consoles or simple LED matrices gain a 240×280 SPI screen and high-performance audio in the same footprint. The jump is worth it when a project needs on-device menus, waveform display or voice interaction without extra cables or separate audio hats.

SPI bandwidth and panel size constrain refresh

The 240×280 panel runs over the Pi Zero SPI bus, so full-screen animation rates are limited by serial throughput. Audio quality depends on the WM8960 codec and external speaker choice; the on-board speaker is suited to alerts, not high-fidelity playback. Projects needing faster video or larger viewing areas require a different display interface.

Pluspunten

  • 69-inch 240×280 LCD gives clear status readouts at a glance
  • WM8960 audio chip with dual microphones and onboard speaker enables voice projects
  • Matching Raspberry Pi Zero 2W footprint keeps handheld builds compact
  • RGB LEDs provide instant visual feedback for scripts or alerts
  • Programmable click button triggers custom Python actions or mouse events

Specificaties

TypeSingle Board Computers

Vragen over dit artikel

Does the HAT share the exact footprint of a Raspberry Pi Zero 2W so it fits inside a standard Zero enclosure?

The board is the same dimension as a Raspberry Pi Zero and is designed to match the Zero 2W perfectly for handheld builds.

Which header pins must be soldered to connect the WM8960 audio chip and the 240×280 SPI display?

The HAT plugs directly onto the 40-pin GPIO header; no extra soldering is required for the audio chip or the SPI display.

Can the onboard speaker be swapped for a larger external one without changing the driver circuit?

The WM8960 amplifier drives both the onboard speaker and an external speaker connector, so a larger speaker can be connected directly.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.