Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Open-frame PCB power supply, green board with components, dual output terminals

Mean Well

Mean Well PD-2505 25W Dual Output Power Supply 5V 15V 2.5A

SKU CH-6VDC-6MCBK

Open-frame AC-DC unit delivers 25 W across 5 V and 15 V rails at 2.5 A each for industrial builds

  • TypeAT
  • Dual 5 V and 15 V rails power mixed-logic boards
  • 25 W total output handles modest industrial loads
  • Each channel delivers 2.5 A for balanced current sharing
  • Open-frame PCB design fits tight chassis spaces
  • 100 % original Mean Well unit verifiable by serial number

25 W Dual-Output Industrial Supply

The Mean Well PD-2505 is an open-frame AC-DC unit that delivers 5 V and 15 V simultaneously from a single 25 W envelope. It targets engineers, technicians and system integrators who need a compact, cost-effective power source for test benches, embedded boards or legacy equipment that runs on dual rails.

Suits dual-rail prototypes, not single-rail loads

Designers who require both 5 V and 15 V at up to 2.5 A each will find the PD-2505 a straightforward fit. Projects that demand only one voltage, higher current on a single rail, power-factor correction or enclosed chassis mounting should look at alternative supply types.

25 W total across two fixed rails

The decisive figure is the 25 W combined output split between a 5 V channel and a 15 V channel, each rated at 2.5 A. This shared budget determines whether the unit can power your specific load without exceeding its limit.

Kohokohdat

  • Dual 5 V and 15 V rails power mixed-logic boards
  • 25 W total output handles modest industrial loads
  • Each channel delivers 2.5 A for balanced current sharing
  • Open-frame PCB design fits tight chassis spaces
  • 100 % original Mean Well unit verifiable by serial number

Tekniset tiedot

TypeAT

Kysymyksiä tästä tuotteesta

Will the PD-2505 dual outputs work with my existing 5 V and 15 V circuits that draw up to 2.5 A each?

The PD-2505 delivers 5 V at 2.5 A on channel one and 15 V at 2.5 A on channel two for a total of 25 W, so it will power existing circuits that stay within those voltage and current limits.

How can I verify the PD-2505 is operating correctly after installation?

Measure the two output rails with a multimeter; you should read 5 V on CH1 and 15 V on CH2 under load, and the unit should run without shutdown or excessive heat.

Does the box include mounting hardware or cables, or must I source them separately?

The package contains one PD-2505 open-frame unit plus a free gift; mounting screws, connectors and wiring are not included and must be purchased separately.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.