We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Open-frame PCB power supply, green board with components, dual output terminals

Mean Well

Mean Well PD-2505 25W Dual Output Power Supply 5V 15V 2.5A

SKU CH-6VDC-6MCBK

Open-frame AC-DC unit delivers 25 W across 5 V and 15 V rails at 2.5 A each for industrial builds

  • TypeAT
  • Dual 5 V and 15 V rails power mixed-logic boards
  • 25 W total output handles modest industrial loads
  • Each channel delivers 2.5 A for balanced current sharing
  • Open-frame PCB design fits tight chassis spaces
  • 100 % original Mean Well unit verifiable by serial number

25 W Dual-Output Industrial Supply

The Mean Well PD-2505 is an open-frame AC-DC unit that delivers 5 V and 15 V simultaneously from a single 25 W envelope. It targets engineers, technicians and system integrators who need a compact, cost-effective power source for test benches, embedded boards or legacy equipment that runs on dual rails.

Suits dual-rail prototypes, not single-rail loads

Designers who require both 5 V and 15 V at up to 2.5 A each will find the PD-2505 a straightforward fit. Projects that demand only one voltage, higher current on a single rail, power-factor correction or enclosed chassis mounting should look at alternative supply types.

25 W total across two fixed rails

The decisive figure is the 25 W combined output split between a 5 V channel and a 15 V channel, each rated at 2.5 A. This shared budget determines whether the unit can power your specific load without exceeding its limit.

Highlights

  • Dual 5 V and 15 V rails power mixed-logic boards
  • 25 W total output handles modest industrial loads
  • Each channel delivers 2.5 A for balanced current sharing
  • Open-frame PCB design fits tight chassis spaces
  • 100 % original Mean Well unit verifiable by serial number

Specifications

TypeAT

Questions about this item

Will the PD-2505 dual outputs work with my existing 5 V and 15 V circuits that draw up to 2.5 A each?

The PD-2505 delivers 5 V at 2.5 A on channel one and 15 V at 2.5 A on channel two for a total of 25 W, so it will power existing circuits that stay within those voltage and current limits.

How can I verify the PD-2505 is operating correctly after installation?

Measure the two output rails with a multimeter; you should read 5 V on CH1 and 15 V on CH2 under load, and the unit should run without shutdown or excessive heat.

Does the box include mounting hardware or cables, or must I source them separately?

The package contains one PD-2505 open-frame unit plus a free gift; mounting screws, connectors and wiring are not included and must be purchased separately.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.