Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
White Micro-ATX tower with fine mesh front panel and side swivel tempered glass, four ARGB fans visible inside

Montech

Montech AIR 100 ARGB (W) Micro-ATX PC case

SKU CH-B8GB-ST59Y MPN AIR 100 ARGB (W)

White Micro-ATX tower with four pre-installed ARGB fans, fine mesh front panel, swivel tempered glass side and support for 330 mm GPU, 161 mm CPU cooler and 240 mm top radiator

  • TypeMicro ATX / Mini-ITX
  • ColorWhite
  • With Power SupplyNo
  • Power Supply MountedBottom
  • Motherboard CompatibilityMicro ATX / Mini ITX
  • Side Panelwith Side Window

Options Air 100 ARGB (White)

  • Fine-mesh front panel delivers high airflow while blocking dust
  • Four pre-installed 120 mm ARGB fans with controller give instant lighting
  • Side swivel tempered glass opens tool-free for easy component access
  • Supports 330 mm GPU and 240 mm top radiator in a compact Micro-ATX frame
  • Top-mounted I/O includes two USB 3.0, USB 2.0 and HD audio ports

Compact micro-ATX tower

The Montech AIR 100 ARGB is a white micro-ATX and mini-ITX chassis that fits motherboards up to micro-ATX size. It comes with four pre-installed 120 mm ARGB fans and an integrated lighting controller. A fine mesh front panel and a side swivel tempered glass panel complete the clean, minimalist exterior. The case supports power supplies up to 160 mm in length, mounted at the bottom.

Builders who value airflow in a small footprint

This case suits users who want strong cooling potential without a full-size ATX tower. The mesh front, top and rear fan mounts, plus radiator support up to 280 mm at the front and 240 mm on top, allow high-performance air or liquid cooling. Builders needing more than four expansion slots, extensive 3.5" drive arrays, or a front-mounted USB Type-C port should consider a larger chassis.

330 mm maximum graphics card length

The 330 mm GPU clearance is the key dimension that decides whether a chosen graphics card will fit. Most mid-range and many high-end dual- and triple-fan cards stay within this limit, while some flagship models exceed it. Verify the exact length of your card before purchase; no other single specification in this case is as decisive for compatibility.

Kohokohdat

  • Fine-mesh front panel delivers high airflow while blocking dust
  • Four pre-installed 120 mm ARGB fans with controller give instant lighting
  • Side swivel tempered glass opens tool-free for easy component access
  • Supports 330 mm GPU and 240 mm top radiator in a compact Micro-ATX frame
  • Top-mounted I/O includes two USB 3.0, USB 2.0 and HD audio ports

Tekniset tiedot

BrandMontech
TypeMicro ATX / Mini-ITX
ColorWhite
With Power SupplyNo
Power Supply MountedBottom
Motherboard CompatibilityMicro ATX / Mini ITX
Side Panelwith Side Window
LEDARGB
Internal 3.5" Drive Bays2
Internal 2.5" Drive Bays2
Expansion Slots4
Front PortsUSB3.0*2, USB2.0*1, Audio*1, mic*1, LED control button
Fan OptionsFront - 2 x 140mm / Front - 3 x 120mm / Rear - 1 x 120mm / Top - 2 x 120mm / Top - 2 x 140mm
Radiator OptionsFront - Up to 280mm / Rear - Up to 120mm / Top - Up to 240mm
Max GPU Length330 mm
Max CPU Cooler Height161 mm
Max PSU Length160 mm
Dimensions15.94" x 8.27" x 16.73"
Lähetyspaino7.12 kg
Pakkauksen mitat505 × 492 × 279 mm

Tämän mallin muut versiot

2 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

Will my existing 160 mm ATX power supply fit the bottom-mounted PSU bracket?

Yes, the case accepts power supplies up to 160 mm long in the bottom position.

How can I confirm the four pre-installed 120 mm ARGB fans and the included controller are functioning after I build the system?

Press the LED button on the top I/O panel to cycle colours, or use motherboard ARGB software to control the fans through the supplied controller.

Which cables and drives must I supply myself beyond the four ARGB fans and controller already installed?

You must provide the power supply, motherboard, CPU cooler, graphics card, storage drives and all data or power cables; the case includes only the fans, controller, front-panel leads and mounting hardware.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.