Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
White Micro-ATX tower with fine mesh front panel and side swivel tempered glass, four ARGB fans visible inside

Montech

Montech AIR 100 ARGB (W) Micro-ATX PC case

SKU CH-B8GB-ST59Y MPN AIR 100 ARGB (W)

White Micro-ATX tower with four pre-installed ARGB fans, fine mesh front panel, swivel tempered glass side and support for 330 mm GPU, 161 mm CPU cooler and 240 mm top radiator

  • TypeMicro ATX / Mini-ITX
  • ColorWhite
  • With Power SupplyNo
  • Power Supply MountedBottom
  • Motherboard CompatibilityMicro ATX / Mini ITX
  • Side Panelwith Side Window

Options Air 100 ARGB (White)

  • Fine-mesh front panel delivers high airflow while blocking dust
  • Four pre-installed 120 mm ARGB fans with controller give instant lighting
  • Side swivel tempered glass opens tool-free for easy component access
  • Supports 330 mm GPU and 240 mm top radiator in a compact Micro-ATX frame
  • Top-mounted I/O includes two USB 3.0, USB 2.0 and HD audio ports

Compact micro-ATX tower

The Montech AIR 100 ARGB is a white micro-ATX and mini-ITX chassis that fits motherboards up to micro-ATX size. It comes with four pre-installed 120 mm ARGB fans and an integrated lighting controller. A fine mesh front panel and a side swivel tempered glass panel complete the clean, minimalist exterior. The case supports power supplies up to 160 mm in length, mounted at the bottom.

Builders who value airflow in a small footprint

This case suits users who want strong cooling potential without a full-size ATX tower. The mesh front, top and rear fan mounts, plus radiator support up to 280 mm at the front and 240 mm on top, allow high-performance air or liquid cooling. Builders needing more than four expansion slots, extensive 3.5" drive arrays, or a front-mounted USB Type-C port should consider a larger chassis.

330 mm maximum graphics card length

The 330 mm GPU clearance is the key dimension that decides whether a chosen graphics card will fit. Most mid-range and many high-end dual- and triple-fan cards stay within this limit, while some flagship models exceed it. Verify the exact length of your card before purchase; no other single specification in this case is as decisive for compatibility.

Prednosti

  • Fine-mesh front panel delivers high airflow while blocking dust
  • Four pre-installed 120 mm ARGB fans with controller give instant lighting
  • Side swivel tempered glass opens tool-free for easy component access
  • Supports 330 mm GPU and 240 mm top radiator in a compact Micro-ATX frame
  • Top-mounted I/O includes two USB 3.0, USB 2.0 and HD audio ports

Špecifikácie

BrandMontech
TypeMicro ATX / Mini-ITX
ColorWhite
With Power SupplyNo
Power Supply MountedBottom
Motherboard CompatibilityMicro ATX / Mini ITX
Side Panelwith Side Window
LEDARGB
Internal 3.5" Drive Bays2
Internal 2.5" Drive Bays2
Expansion Slots4
Front PortsUSB3.0*2, USB2.0*1, Audio*1, mic*1, LED control button
Fan OptionsFront - 2 x 140mm / Front - 3 x 120mm / Rear - 1 x 120mm / Top - 2 x 120mm / Top - 2 x 140mm
Radiator OptionsFront - Up to 280mm / Rear - Up to 120mm / Top - Up to 240mm
Max GPU Length330 mm
Max CPU Cooler Height161 mm
Max PSU Length160 mm
Dimensions15.94" x 8.27" x 16.73"
Prepravná hmotnosť7.12 kg
Rozmery balenia505 × 492 × 279 mm

Ďalšie verzie tohto modelu

Ďalších 2 v tomto rade

Rovnaký rad, iná pamäť, chladič alebo frekvencia — porovnajte pred rozhodnutím.

Otázky k tomuto produktu

Will my existing 160 mm ATX power supply fit the bottom-mounted PSU bracket?

Yes, the case accepts power supplies up to 160 mm long in the bottom position.

How can I confirm the four pre-installed 120 mm ARGB fans and the included controller are functioning after I build the system?

Press the LED button on the top I/O panel to cycle colours, or use motherboard ARGB software to control the fans through the supplied controller.

Which cables and drives must I supply myself beyond the four ARGB fans and controller already installed?

You must provide the power supply, motherboard, CPU cooler, graphics card, storage drives and all data or power cables; the case includes only the fans, controller, front-panel leads and mounting hardware.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.