Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
White mid-tower PC case with mesh front panel, tempered glass side panel, five pre-installed ARGB fans, reversible layout

Montech

Montech HS01 PRO (W) ATX Mid-Tower PC Case White

SKU CH-GD54-4ERKR MPN HS01 PRO (W)

White ATX mid-tower with reversible layout, five pre-installed ARGB PWM fans, mesh front panel and vertical GPU support

  • ColorWhite
  • Case MaterialSPCC / Tempered Glass
  • Motherboard CompatibilityATX / Micro ATX / Mini ITX
  • LEDARGB
  • Internal 3.5" Drive Bays2
  • Internal 2.5" Drive Bays2

Options HS01 PRO Mesh White

Yliviivatut versiot ovat olemassa, mutta niitä ei ole varastossa täällä.

  • Reversible layout lets the glass panel face left or right for flexible display
  • Chimney-style airflow pulls cool air from the bottom and exhausts heat through the top
  • Sink-in bottom fan and motherboard layout keep the side view clean and unobstructed
  • Rotatable PCIe slots enable vertical GPU mounting without an extra holder or stand
  • 5 pre-installed ARGB PWM fans with 29 lighting modes provide instant cooling and colour control

Reversible Layout

The Montech HS01 PRO (W) is a white ATX mid-tower case built for system builders who want flexible orientation. Its reversible design lets the tempered glass panel sit on either the left or right side so the internal hardware remains visible regardless of desk placement. Support for ATX, Micro ATX and Mini ITX motherboards covers a wide range of build sizes.

Five Pre‑Installed ARGB PWM Fans

Five ARGB PWM fans come fitted out of the box and provide 29 lighting modes controllable via standard headers. The chimney‑style airflow path draws cool air from the bottom and exhausts it through the top and dual rear positions. A mesh front panel and repositioned rear mounts free interior volume for additional cooling hardware.

Vertical GPU And Back‑Connect Ready

Rotatable PCIe slots across 14 expansion positions enable a vertical graphics card installation up to 420 mm long without extra brackets. The relocated PSU area supports Back‑Connect motherboards for cleaner cable routing behind the motherboard tray. Builders needing CPU coolers taller than 175 mm or radiators wider than 123 mm at the top should consider alternative chassis.

Kohokohdat

  • Reversible layout lets the glass panel face left or right for flexible display
  • Chimney-style airflow pulls cool air from the bottom and exhausts heat through the top
  • Sink-in bottom fan and motherboard layout keep the side view clean and unobstructed
  • Rotatable PCIe slots enable vertical GPU mounting without an extra holder or stand
  • 5 pre-installed ARGB PWM fans with 29 lighting modes provide instant cooling and colour control

Tekniset tiedot

BrandMontech
Part NumberHS01 PRO (W)
ColorWhite
Case MaterialSPCC / Tempered Glass
Motherboard CompatibilityATX / Micro ATX / Mini ITX
LEDARGB
Internal 3.5" Drive Bays2
Internal 2.5" Drive Bays2
Expansion Slots14
Fan OptionsBottom - 3 x 120mm / Front - 3 x 120mm / Rear - 2 x 120mm / Top - 3 x 120mm
Radiator OptionsBottom - Up to 120mm / Rear - Up to 120mm / Top - Up to 360mm
Max GPU Length420 mm
Max CPU Cooler Height175 mm
Max PSU Length200 mm
Dimensions18.91" x 9.45" x 18.91"
Lähetyspaino12.34 kg
Pakkauksen mitat584 × 559 × 330 mm

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

Will a 420 mm long graphics card fit without hitting the front fans?

Yes, the case supports GPUs up to 420 mm in length, so a card of that size will clear the front fan mounts.

Can I install a 360 mm radiator in the top and still use the rear fans?

The top supports radiators up to 360 mm, but the manufacturer notes a maximum width of 123 mm; dual 120 mm rear fans are pre-installed and may need relocation if the radiator exceeds that width.

Does the reversible layout work with a standard ATX motherboard?

Yes, the top-down reversible design accommodates ATX, Micro-ATX and Mini-ITX boards, letting you place the tempered-glass panel on either side.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.