Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
White mid-tower PC case with mesh front panel, tempered glass side panel, and reversible layout

Montech

Montech HS01 (W) White ATX Mid-Tower PC Case

SKU CH-EKQA-6JGH1 MPN HS01 (W)

A white ATX mid-tower case with reversible layout, mesh front panel and support for 420 mm GPUs, 360 mm top radiators and 14 expansion slots

  • ColorWhite
  • Case MaterialSPCC / Tempered Glass
  • Motherboard CompatibilityATX / Micro ATX / Mini ITX
  • Internal 3.5" Drive Bays2
  • Internal 2.5" Drive Bays2
  • Expansion Slots14

Options HS01 Mesh White

Yliviivatut versiot ovat olemassa, mutta niitä ei ole varastossa täällä.

  • Reversible layout puts the glass panel on either side for flexible display
  • Chimney-style airflow pulls cool air from bottom and exhausts heat through top
  • Vertical GPU mounting rotates PCIe slots for showcase builds without extra hardware
  • Sink-in design recesses the bottom fan and motherboard for an unobstructed side view
  • 29 ARGB lighting modes let you customise the look to match your build

Reversible Mid-Tower Layout

The Montech HS01 (W) is a white ATX mid-tower case built for system builders who want flexible component placement. Its reversible design lets the tempered glass panel sit on either the left or right side so the interior is always visible. Support for ATX, Micro ATX and Mini ITX motherboards covers most modern build plans.

Chimney-Effect Airflow Under Load

A bottom-to-top vertical airflow path creates a natural chimney effect that moves heat away from components during sustained workloads. Dual rear exhaust fans and a mesh front panel feed this stream, while the top radiator mount accepts up to 360 mm units with a 123 mm width limit. The layout delivers cooling efficiency comparable to open-frame designs without sacrificing enclosure benefits.

Upgrade From Standard Layout Cases

Builders moving from conventional front-to-back cases gain a sink-in bottom fan design that clears the side view and rotatable PCIe slots for instant vertical GPU mounting. The relocated PSU chamber supports Back-Connect motherboards for cleaner cable routing. The jump is worthwhile when a 420 mm GPU, 175 mm CPU cooler or 200 mm power supply must fit alongside 14 expansion slots and 29 ARGB lighting modes.

Kohokohdat

  • Reversible layout puts the glass panel on either side for flexible display
  • Chimney-style airflow pulls cool air from bottom and exhausts heat through top
  • Vertical GPU mounting rotates PCIe slots for showcase builds without extra hardware
  • Sink-in design recesses the bottom fan and motherboard for an unobstructed side view
  • 29 ARGB lighting modes let you customise the look to match your build

Tekniset tiedot

BrandMontech
Part NumberHS01(W)
ColorWhite
Case MaterialSPCC / Tempered Glass
Motherboard CompatibilityATX / Micro ATX / Mini ITX
Internal 3.5" Drive Bays2
Internal 2.5" Drive Bays2
Expansion Slots14
Fan OptionsBottom - 3 x 120mm / Front - 3 x 120mm / Rear - 2 x 120mm / Top - 3 x 120mm
Radiator OptionsBottom - Up to 120mm / Rear - Up to 120mm / Top - Up to 360mm
Max GPU Length420 mm
Max CPU Cooler Height175 mm
Max PSU Length200 mm
Dimensions18.91" x 9.45" x 18.91"
Lähetyspaino12.34 kg
Pakkauksen mitat584 × 559 × 330 mm

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

Will my ATX motherboard and a 420 mm graphics card fit together in this case?

Yes, the case supports ATX, Micro ATX and Mini ITX boards and allows a maximum GPU length of 420 mm.

Can I install a 360 mm radiator on the top while keeping the front mesh panel in place?

The top supports radiators up to 360 mm with a maximum width of 123 mm, and the mesh front panel remains fully functional.

Does the reversible layout work with back-connect motherboards for cleaner cable routing?

The relocated PSU placement is designed for back-connect motherboards, and the reversible design lets you show the glass on either side.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.