Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in
White mid-tower PC case with mesh front panel, tempered glass side panel, and reversible layout

Montech

Montech HS01 (W) White ATX Mid-Tower PC Case

SKU CH-EKQA-6JGH1 MPN HS01 (W)

A white ATX mid-tower case with reversible layout, mesh front panel and support for 420 mm GPUs, 360 mm top radiators and 14 expansion slots

  • ColorWhite
  • Case MaterialSPCC / Tempered Glass
  • Motherboard CompatibilityATX / Micro ATX / Mini ITX
  • Internal 3.5" Drive Bays2
  • Internal 2.5" Drive Bays2
  • Expansion Slots14

Options HS01 Mesh White

Genomstrukna varianter finns, men är inte i lager här.

  • Reversible layout puts the glass panel on either side for flexible display
  • Chimney-style airflow pulls cool air from bottom and exhausts heat through top
  • Vertical GPU mounting rotates PCIe slots for showcase builds without extra hardware
  • Sink-in design recesses the bottom fan and motherboard for an unobstructed side view
  • 29 ARGB lighting modes let you customise the look to match your build

Reversible Mid-Tower Layout

The Montech HS01 (W) is a white ATX mid-tower case built for system builders who want flexible component placement. Its reversible design lets the tempered glass panel sit on either the left or right side so the interior is always visible. Support for ATX, Micro ATX and Mini ITX motherboards covers most modern build plans.

Chimney-Effect Airflow Under Load

A bottom-to-top vertical airflow path creates a natural chimney effect that moves heat away from components during sustained workloads. Dual rear exhaust fans and a mesh front panel feed this stream, while the top radiator mount accepts up to 360 mm units with a 123 mm width limit. The layout delivers cooling efficiency comparable to open-frame designs without sacrificing enclosure benefits.

Upgrade From Standard Layout Cases

Builders moving from conventional front-to-back cases gain a sink-in bottom fan design that clears the side view and rotatable PCIe slots for instant vertical GPU mounting. The relocated PSU chamber supports Back-Connect motherboards for cleaner cable routing. The jump is worthwhile when a 420 mm GPU, 175 mm CPU cooler or 200 mm power supply must fit alongside 14 expansion slots and 29 ARGB lighting modes.

I korthet

  • Reversible layout puts the glass panel on either side for flexible display
  • Chimney-style airflow pulls cool air from bottom and exhausts heat through top
  • Vertical GPU mounting rotates PCIe slots for showcase builds without extra hardware
  • Sink-in design recesses the bottom fan and motherboard for an unobstructed side view
  • 29 ARGB lighting modes let you customise the look to match your build

Specifikationer

BrandMontech
Part NumberHS01(W)
ColorWhite
Case MaterialSPCC / Tempered Glass
Motherboard CompatibilityATX / Micro ATX / Mini ITX
Internal 3.5" Drive Bays2
Internal 2.5" Drive Bays2
Expansion Slots14
Fan OptionsBottom - 3 x 120mm / Front - 3 x 120mm / Rear - 2 x 120mm / Top - 3 x 120mm
Radiator OptionsBottom - Up to 120mm / Rear - Up to 120mm / Top - Up to 360mm
Max GPU Length420 mm
Max CPU Cooler Height175 mm
Max PSU Length200 mm
Dimensions18.91" x 9.45" x 18.91"
Fraktvikt12.34 kg
Paketstorlek584 × 559 × 330 mm

Andra versioner av den här modellen

5 till i samma serie

Samma familj, men olika minne, kylning eller klockfrekvens — jämför innan du bestämmer dig.

Frågor om den här produkten

Will my ATX motherboard and a 420 mm graphics card fit together in this case?

Yes, the case supports ATX, Micro ATX and Mini ITX boards and allows a maximum GPU length of 420 mm.

Can I install a 360 mm radiator on the top while keeping the front mesh panel in place?

The top supports radiators up to 360 mm with a maximum width of 123 mm, and the mesh front panel remains fully functional.

Does the reversible layout work with back-connect motherboards for cleaner cable routing?

The relocated PSU placement is designed for back-connect motherboards, and the reversible design lets you show the glass on either side.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.