Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Black mid-tower ATX case with floating base design, mesh front panel and two large front fans

MSI

MSI MPG VIXTA 300R AIRFLOW PZ PC case

SKU CH-XWGA-VVH64 MPN MPG VIXTA 300R AIRFLOW PZ

Mid-tower ATX case with floating base design, dual 160 mm front fans and support for 360 mm top radiators

  • TypeATX Mid Tower
  • Motherboard CompatibilityRegular: ATX, Micro-ATX, Mini-ITX Back-connect: ATX / Micro-
  • Internal 3.5" Drive Bays1
  • Internal 2.5" Drive Bays1
  • Expansion Slots7
  • Front Ports1 x USB 20Gbps (Type-C) 2 x USB 5Gbps (Type-A) 1 x Audio-Out
  • Supports up to 11 fans plus 360 mm top radiator for strong cooling headroom
  • Floating base and mesh front with two 160 mm fans push high-volume air through the chassis
  • Built-in 1-to-4 ARGB and PWM hub simplifies lighting sync and fan control
  • Tool-free side panel magnetic PSU cover and uni-front cable make upgrades and cleaning fast
  • Fits 390 mm GPU 165 mm CPU cooler and 190 mm PSU in a compact 455 × 235 × 497 mm frame

Mid-Tower ATX Case with Floating Base

The MPG VIXTA 300R AIRFLOW PZ is a mid-tower chassis built around a floating base design that separates the motherboard tray from the PSU shroud. It accepts ATX, Micro-ATX and Mini-ITX boards, including back-connect variants. Two pre-installed 160 mm front fans and one 120 mm rear fan provide immediate airflow through the mesh front panel.

Builders Wanting High Airflow and Easy Access

The case suits builders who prioritise cooling headroom and tool-free maintenance. It offers space for up to 11 fans and a 360 mm top radiator, plus a magnetic PSU shroud cover and uni-front panel cable. Buyers needing more than one 3.5 inch bay or a second 2.5 inch bay should look at larger enclosures.

Tool-Free Install With Magnetic Shroud

Side panels snap off without screws and the magnetic PSU shroud cover lifts away for cable routing. The 1-to-4 ARGB and PWM hub consolidates fan and lighting connections. Installers should verify that their graphics card does not exceed 390 mm and that the CPU cooler stays within 165 mm, otherwise clearance issues will arise.

Kohokohdat

  • Supports up to 11 fans plus 360 mm top radiator for strong cooling headroom
  • Floating base and mesh front with two 160 mm fans push high-volume air through the chassis
  • Built-in 1-to-4 ARGB and PWM hub simplifies lighting sync and fan control
  • Tool-free side panel magnetic PSU cover and uni-front cable make upgrades and cleaning fast
  • Fits 390 mm GPU 165 mm CPU cooler and 190 mm PSU in a compact 455 × 235 × 497 mm frame

Tekniset tiedot

BrandMSI
ModelMPG VIXTA 300R AIRFLOW PZ
TypeATX Mid Tower
Motherboard CompatibilityRegular: ATX, Micro-ATX, Mini-ITX
Back-connect: ATX / Micro-ATX
Internal 3.5" Drive Bays1
Internal 2.5" Drive Bays1
Expansion Slots7
Front Ports1 x USB 20Gbps (Type-C)
2 x USB 5Gbps (Type-A)
1 x Audio-Out / Mic-in
1 x LED Button
1 x Power Button
Fan OptionsFront: 2 x 160 mm
Rear: 1 x 120 mm
Top: 3 x 120 mm
Side: 2 x 120 mm / 2 x 140 mm
PSU Shroud: 3 x 120 mm
Pre-installed FansFront - 2 x 160mm / Rear - 1 x 120mm
Radiator OptionsRear - Up to 120mm / Side - Up to 120mm / Side - Up to 240mm / Top - Up to 120mm / Top - Up to 240mm / Top - Up to 360mm
Max GPU Length390 mm
Max CPU Cooler Height165 mm
Max PSU Length190 mm
Dimensions455 x 235 x 497 mm /
17.9 x 9.25 x 19.57 inches
Weight8.3kg
Lähetyspaino11.00 kg
Pakkauksen mitat510 × 470 × 250 mm

Kysymyksiä tästä tuotteesta

Which motherboard form factors does the MPG VIXTA 300R AIRFLOW PZ support?

The case fits regular ATX, Micro-ATX, Mini-ITX and back-connect ATX or Micro-ATX boards.

Can I keep my existing 3.5" and 2.5" drives when moving into this case?

Yes, the case provides one internal 3.5" bay and one internal 2.5" bay for those drives.

How do I confirm the pre-installed fans and ARGB lighting are working after I build?

Power on the system; the two front 160 mm fans and rear 120 mm fan should spin, and the LED button on the front panel cycles the ARGB effects.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.