Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Rectangular metal power supply with 14cm fan and modular cable connectors

myVolts

myVolts 2400W Mining Power Supply 8 GPU 220V 14cm Fan 95% Efficiency

SKU CH-7J2J-HFJ0R

A 2400 W mining power supply supporting eight graphics cards with sixteen 6+2-pin connectors, a 14 cm thermally controlled fan, 95 % conversion efficiency and over-temperature protection at 50 °C

  • TypeAT
  • Supports up to 8 graphics cards with 2400W output
  • 95% conversion rate reduces electricity waste
  • Auto thermal protection activates above 50 degrees
  • 14cm silent fan with dust cover for cooling
  • Pure copper core cables and metal shell for durability

2400W mining PSU for eight GPUs

The myVolts unit delivers 2400 W at 220 V and provides sixteen 6+2-pin connectors to feed up to eight graphics cards. A single 24-pin ATX and one 4+4-pin EPS connector power the motherboard, while eight Sata and four large 4-pin leads handle risers and peripherals. The 95 % conversion rate reduces waste heat during continuous mining loads.

Sustained load with auto thermal control

A 14 cm fan spins under automatic thermal regulation to keep internal temperatures in check during round-the-clock operation. If the internal temperature exceeds 50 °C the protection circuit activates and shuts the unit down to prevent damage. The metal chassis and pure copper wiring are built to withstand prolonged high-current draw without degradation.

220 V input and physical limits

The power supply operates only at 220 V, so a step-up transformer is required in regions with lower mains voltage. Dimensions are 165 x 150 x 86 mm, allowing it to fit on standard mining shelves. A fitted dust cover adds moisture and dust resistance for harsh environments.

Kohokohdat

  • Supports up to 8 graphics cards with 2400W output
  • 95% conversion rate reduces electricity waste
  • Auto thermal protection activates above 50 degrees
  • 14cm silent fan with dust cover for cooling
  • Pure copper core cables and metal shell for durability

Tekniset tiedot

TypeAT

Kysymyksiä tästä tuotteesta

How loud is the 14cm fan when the 2400W supply runs continuously?

The 14cm fan is thermally controlled and spins up only when needed; high-temperature protection activates at 50°C to prevent damage.

What mains voltage must be available for this 220V unit to deliver full power?

It requires a stable 220V supply; if your outlet is lower you will need a step-up transformer before connecting it.

Can I keep my existing Sata drives and 6+2pin GPU cables with this supply?

Yes — it provides eight Sata connectors and sixteen 6+2pin cables, so current drives and GPUs plug in directly.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.