myVolts 2400W Mining Power Supply 8 GPU 220V 14cm Fan 95% Efficiency

2400W mining PSU for eight GPUs

The myVolts unit delivers 2400 W at 220 V and provides sixteen 6+2-pin connectors to feed up to eight graphics cards. A single 24-pin ATX and one 4+4-pin EPS connector power the motherboard, while eight Sata and four large 4-pin leads handle risers and peripherals. The 95 % conversion rate reduces waste heat during continuous mining loads.

Sustained load with auto thermal control

A 14 cm fan spins under automatic thermal regulation to keep internal temperatures in check during round-the-clock operation. If the internal temperature exceeds 50 °C the protection circuit activates and shuts the unit down to prevent damage. The metal chassis and pure copper wiring are built to withstand prolonged high-current draw without degradation.

220 V input and physical limits

The power supply operates only at 220 V, so a step-up transformer is required in regions with lower mains voltage. Dimensions are 165 x 150 x 86 mm, allowing it to fit on standard mining shelves. A fitted dust cover adds moisture and dust resistance for harsh environments.