Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Small metal encoder 38mm diameter stainless shaft 2m cable

myVolts

myVolts E6B2-CWZ6C Incremental Encoder 38mm 100 P/R

SKU CH-P56C-H4GXR MPN E6B2-CWZ6C

38 mm diameter incremental encoder delivering 100 pulses per revolution with 5 – 26 V DC open-collector output and reverse-wiring protection

  • TypeAT
  • Precise positioning with 100 pulses per revolution
  • Reliable operation from DC 5 V to 26 V supply
  • Durable stainless steel spindle handles 30 N radial and 20 N axial loads
  • Protected against short circuits and reverse wiring faults
  • Compact 38 mm metal housing with 2 m cable for easy fit

38 mm Incremental Encoder for Motion Feedback

The myVolts E6B2-CWZ6C is a 38 mm diameter incremental encoder designed for precise position and speed feedback in automation and motion-control systems. It delivers 100 pulses per revolution with A, B and Z phase outputs and operates from a DC 5 V to 26 V supply using an open-collector output stage.

Verify Voltage and Shaft Loading Before Installing

Confirm that your controller accepts a DC 5 V to 26 V open-collector signal and that the 6 mm shaft can accommodate the specified 30 N radial and 20 N axial loads. The 2 m cable uses brown for positive supply, blue for ground and black for signal; ensure your wiring harness matches this colour code and that reverse-polarity protection is not already provided upstream.

Stable Output During Continuous Operation

Internal ASIC circuitry maintains consistent pulse timing and strong anti-interference performance during extended runs. Load short-circuit protection and supply reverse-wiring protection guard the output stage against sustained fault conditions, while the stainless-steel spindle and metal shell resist mechanical wear under continuous shaft loading.

Kohokohdat

  • Precise positioning with 100 pulses per revolution
  • Reliable operation from DC 5 V to 26 V supply
  • Durable stainless steel spindle handles 30 N radial and 20 N axial loads
  • Protected against short circuits and reverse wiring faults
  • Compact 38 mm metal housing with 2 m cable for easy fit

Tekniset tiedot

TypeAT

Kysymyksiä tästä tuotteesta

What comes in the box with the E6B2-CWZ6C encoder and do I need to buy a separate power supply?

The encoder ships with a 2 m cable pre-wired for DC 5–26 V open-collector output; a compatible DC power source within that voltage range must be provided separately.

Which resolution should I choose for the 38 mm incremental encoder?

The E6B2-CWZ6C is supplied at 100 pulses per revolution; other resolutions from 200 to 5000 P/R are optional variants you would select when ordering.

What does the 100 P/R rating mean once the encoder is mounted on a 6 mm shaft?

Each full rotation of the 6 mm stainless-steel spindle produces 100 quadrature pulses on the A, B and Z channels, giving a positional granularity of 3.6 degrees per count.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.