Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Compact 38mm metal incremental encoder with stainless steel spindle and 2m cable

myVolts

myVolts E6B2-CWZ6C Incremental Encoder Power Supply 38mm 1024P/R

SKU CH-29MX-AA1G0 MPN E6B2-CWZ6C

A 38 mm incremental encoder delivering 1024 pulses per revolution with DC 5–26 V supply, ASIC anti-interference, short-circuit and reverse-wiring protection.

  • TypeAT
  • Precise positioning with 1024 pulses per revolution resolution
  • Reliable operation through internal ASIC anti-interference design
  • Durable construction via stainless steel spindle and metal shell
  • Flexible integration with DC 5-26V wide voltage range
  • Protected circuitry featuring short circuit and reverse wiring safeguards

38 mm Incremental Encoder Power Supply

The myVolts E6B2-CWZ6C is a 38 mm incremental encoder designed for motion-control systems that need precise position feedback. It delivers A, B and Z phase signals through voltage, collector, complementary, push-pull, long-line-drive, differential or fork output modes. Resolution options range from 100 to 5000 pulses per revolution, with 1024 P/R fitted on this unit. The stainless-steel spindle and metal shell provide mechanical stability in industrial environments.

Check DC Voltage and Shaft Loading

Verify that your controller can accept a DC 5 to 26 V open-collector input before wiring the brown and blue supply leads. Confirm the mechanical interface matches a 6 mm thrust shaft diameter and that axial loads stay within 30 N and thrust loads within 20 N. The encoder ships with a 2 m cable; ensure the routing length and connector style suit your cabinet layout. Reverse-wiring and short-circuit protection are built in, but correct polarity must still be observed.

Bundled Cable and Output Flexibility

The included 2 m wiring harness uses colour-coded leads for rapid termination: brown for positive supply, blue for ground, black for signal outputs. Multiple output modes let you match the encoder to PLC inputs, motor drives or counter cards without extra signal-conditioning hardware. Selectable resolution up to 5000 P/R allows tuning precision to the application without changing the mechanical package.

Kohokohdat

  • Precise positioning with 1024 pulses per revolution resolution
  • Reliable operation through internal ASIC anti-interference design
  • Durable construction via stainless steel spindle and metal shell
  • Flexible integration with DC 5-26V wide voltage range
  • Protected circuitry featuring short circuit and reverse wiring safeguards

Tekniset tiedot

TypeAT

Kysymyksiä tästä tuotteesta

What comes in the box with the E6B2-CWZ6C encoder and what must I source separately?

The encoder includes a 2 m cable with brown (DC5-26 V), blue (0 V) and black (signal) leads; you must supply a DC5-26 V power source and any mounting hardware.

Which resolution should I choose from the 100 to 5000 P/R options for the E6B2-CWZ6C?

Select the resolution that matches your controller’s required counts per revolution; 1024 P/R is a common default for many motion systems.

What does the 1024 P/R rating mean when the encoder is installed on a machine?

Each full shaft rotation produces 1024 pulses on the A and B channels, giving the controller 1024 discrete position steps per revolution.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.