Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Small green PCB with 24-pin ATX plug, 4+4 CPU, SATA, IDE and DC jack, short cables attached

myVolts

myVolts LD-A160WL 12V 160W DC-ATX power supply

SKU CH-9F40-SJJTJ MPN LD-A160WL

Direct-plug 12 V DC-ATX board delivers 160 W through ATX24, CPU4+4, SATA, IDE and DC5525 connectors with over-current and short-circuit protection

  • TypeAT
  • Direct motherboard power via 24-pin ATX connector eliminates 24 wires
  • Compact design fits ITX and HTPC cases while delivering 160 W
  • Overcurrent protection shuts down output when maximum current is reached
  • circuit protection turns off power instantly during a fault
  • Multiple rails provide +5 VSB at 2 A, +5 V at 6 A, +3.3 V at 6 A, +12 V at 8 A

Compact DC-ATX board for 12 V systems

The myVolts LD-A160WL plugs straight into a 24-pin ATX socket and delivers 160 W from a single 12 V source. It removes the bulk of a standard PSU and the tangle of 24 wires, making it a tidy fit for thin Mini-ITX builds, HTPC cases or embedded appliances.

Suited to space-constrained 12 V builds.

Builders powering a low-draw board from a 12 V brick or battery will appreciate the direct ATX connection and short cables. Systems that require mains input, higher wattage or multiple PCIe power connectors must use a conventional ATX supply instead.

160 W total from a 12 V DC input

The board accepts 12 V and regulates five rails: +12 V at 8 A, +5 V at 6 A, +3.3 V at 6 A, +5 VSB at 2 A and -12 V at 0.15 A. Over-current and short-circuit protection shut the outputs down when limits are exceeded.

Kohokohdat

  • Direct motherboard power via 24-pin ATX connector eliminates 24 wires
  • Compact design fits ITX and HTPC cases while delivering 160 W
  • Overcurrent protection shuts down output when maximum current is reached
  • circuit protection turns off power instantly during a fault
  • Multiple rails provide +5 VSB at 2 A, +5 V at 6 A, +3.3 V at 6 A, +12 V at 8 A

Tekniset tiedot

TypeAT

Kysymyksiä tästä tuotteesta

What comes in the box and what else is needed to run the LD-A160WL?

The box includes the board with ATX 24-pin, CPU 4+4-pin, SATA, IDE and DC 5525 connectors plus cables up to 320 mm. You must supply a 12V DC source such as an external brick or battery.

How do I pick between the listed voltage rails for my build?

The board delivers fixed rails of +12V/8A, +5V/6A, +3.3V/6A, +5VSB/2A and -12V/0.15A simultaneously; choose a 12V source that can provide at least 160W total.

What does the 160W rating mean once the board is installed in a Mini-ITX or HTPC system?

It is the combined maximum output across all rails; the +12V rail supplies up to 8A, the +5V and +3.3V rails each supply up to 6A, and the +5VSB rail supplies up to 2A, with over-current and short-circuit shutdown.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.