Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Ultra-slim DIN rail power supply in a plastic case, 100W 12V output

myVolts

myVolts MDR-100-12 100W 12V DIN Rail Power Supply

SKU CH-QCKR-P9R5G

Ultra-slim DIN rail power supply delivering 12 V at 100 W with short-circuit, overload, over-voltage and over-temperature protection

  • TypeAT
  • 100 W output powers industrial PLCs and sensors reliably
  • Ultra-slim design fits DIN rail TS-35/7.5 or 15 for tight cabinets
  • Universal AC input accepts full voltage range worldwide
  • Multiple protections guard against short circuit overload over voltage and over temperature
  • No-load consumption below 1 W cuts standby energy waste

Industrial DIN-rail power supply

The myVolts MDR-100-12 is a 100W single-output unit delivering 12V at 7.5A. It is built for industrial PLCs, sensors, robots, automated factories, test equipment, distribution cabinets and subway gate control systems. The ultra-slim plastic case mounts on standard TS-35/7.5 or 15 DIN rails. Cooling is by free air convection with no fan.

Snap-on rail mounting with basic wiring

Installation consists of clipping the housing onto a compatible DIN rail and connecting the AC input and DC output terminals. The universal AC input accepts a full voltage range automatically. Built-in protections cover short circuit, overload, over voltage and over temperature. A DC OK relay contact and a power-on LED give immediate status feedback. No-load consumption stays below 1W.

Suits control-panel builds needing 12V

This unit fits panels that require a compact 12V 100W source with relay signalling and convection cooling. It is not intended for applications that need a different output voltage such as 24V or 48V, nor for builds that demand forced-air cooling or a non-DIN enclosure format. Buyers who need multiple output rails or higher power should look at other models.

Kohokohdat

  • 100 W output powers industrial PLCs and sensors reliably
  • Ultra-slim design fits DIN rail TS-35/7.5 or 15 for tight cabinets
  • Universal AC input accepts full voltage range worldwide
  • Multiple protections guard against short circuit overload over voltage and over temperature
  • No-load consumption below 1 W cuts standby energy waste

Tekniset tiedot

TypeAT

Kysymyksiä tästä tuotteesta

How can I confirm the MDR-100-12 is operating correctly once it is mounted on the DIN rail?

The built-in LED indicator lights when the unit is powered on, and the DC OK relay contact provides a signal that the output voltage is within specification.

What comes in the box with the MDR-100-12 and what must I source separately?

The power supply itself is supplied; you will need to provide a TS-35/7.5 or TS-35/15 DIN rail for mounting and your own AC input and DC output wiring.

Which output voltage version should I select for a 12 V industrial PLC sensor system?

Choose the MDR-100-12 model, which delivers 12 V at 7.5 A; the range also includes 24 V and 48 V versions for different voltage requirements.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.