Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Pink aluminium AT power supply, 24V 41.6A 1000W, AC170-250V input

myVolts

myVolts S-1000-24 24V 41.6A 1000W pink power supply

SKU CH-43FV-9KPN3

A 24V 41.6A 1000W AT switch-mode power supply with overload, over-voltage and short-circuit protection, CCC, FCC and CE compliance, and an adjustable output voltage

  • TypeAT
  • High efficiency and low DC ripple for stable output
  • Operates down to 0 °C for extended service life
  • 100 % full-load burn-in test ensures reliable operation
  • circuit, overload and over-voltage protection safeguards equipment
  • CCC, FCC and CE certified for safety compliance

24V 1000W Industrial Power Supply

The myVolts S-1000-24 delivers a regulated 24V DC output at up to 41.6A for 1000W continuous power. It accepts AC input between 170V and 250V, making it suitable for industrial automation, LED displays, CCTV systems, radio equipment, 3D printers and computer engineering projects. The aluminium alloy chassis aids heat dissipation without a fan. Safety certifications include CCC, FCC and CE.

Capacity and Headroom

At full load the unit supplies 41.6A with low DC ripple and high working efficiency. Protection circuits cover short circuit, overload and overvoltage events, and every unit passes a 100% burn-in test before shipment. Operating temperature range is 0°C to 40°C with up to 95% non-condensing humidity; beyond these limits thermal headroom diminishes and protection may engage.

Build Quality and Connections

The aluminium alloy housing provides excellent insulation strength and long service life at low operating temperatures. Screw terminals are labelled L and N for AC input, GND for DC negative, V for DC positive and +V/ADJ for output voltage adjustment. This terminal layout suits panel or chassis mounting in fixed installations but requires manual wiring rather than standard ATX connectors.

Kohokohdat

  • High efficiency and low DC ripple for stable output
  • Operates down to 0 °C for extended service life
  • 100 % full-load burn-in test ensures reliable operation
  • circuit, overload and over-voltage protection safeguards equipment
  • CCC, FCC and CE certified for safety compliance

Tekniset tiedot

TypeAT

Kysymyksiä tästä tuotteesta

Will the S-1000-24 24V 41.6A 1000W pink power supply accept my existing AC input that falls between 170 V and 250 V?

Yes, the unit is rated for AC 170-250 V input, so any mains supply within that range will work without modification.

How can I verify the S-1000-24 is delivering a stable 24 V output after installation?

Measure the DC voltage across the V+ and GND terminals with a multimeter; it should read 24 V and the ADJ terminal allows fine adjustment if needed.

What comes in the box with the S-1000-24 and what must I source separately?

The supply itself with L, N, GND, V and ADJ terminals is included; an AC power cord, mounting hardware and any load-side connectors are not supplied.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.