Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.

Spremljani izdelki Prijava
Pink aluminium AT power supply, 24V 41.6A 1000W, AC170-250V input

myVolts

myVolts S-1000-24 24V 41.6A 1000W pink power supply

SKU CH-43FV-9KPN3

A 24V 41.6A 1000W AT switch-mode power supply with overload, over-voltage and short-circuit protection, CCC, FCC and CE compliance, and an adjustable output voltage

  • TypeAT
  • High efficiency and low DC ripple for stable output
  • Operates down to 0 °C for extended service life
  • 100 % full-load burn-in test ensures reliable operation
  • circuit, overload and over-voltage protection safeguards equipment
  • CCC, FCC and CE certified for safety compliance

24V 1000W Industrial Power Supply

The myVolts S-1000-24 delivers a regulated 24V DC output at up to 41.6A for 1000W continuous power. It accepts AC input between 170V and 250V, making it suitable for industrial automation, LED displays, CCTV systems, radio equipment, 3D printers and computer engineering projects. The aluminium alloy chassis aids heat dissipation without a fan. Safety certifications include CCC, FCC and CE.

Capacity and Headroom

At full load the unit supplies 41.6A with low DC ripple and high working efficiency. Protection circuits cover short circuit, overload and overvoltage events, and every unit passes a 100% burn-in test before shipment. Operating temperature range is 0°C to 40°C with up to 95% non-condensing humidity; beyond these limits thermal headroom diminishes and protection may engage.

Build Quality and Connections

The aluminium alloy housing provides excellent insulation strength and long service life at low operating temperatures. Screw terminals are labelled L and N for AC input, GND for DC negative, V for DC positive and +V/ADJ for output voltage adjustment. This terminal layout suits panel or chassis mounting in fixed installations but requires manual wiring rather than standard ATX connectors.

Poudarki

  • High efficiency and low DC ripple for stable output
  • Operates down to 0 °C for extended service life
  • 100 % full-load burn-in test ensures reliable operation
  • circuit, overload and over-voltage protection safeguards equipment
  • CCC, FCC and CE certified for safety compliance

Specifikacije

TypeAT

Vprašanja o tem izdelku

Will the S-1000-24 24V 41.6A 1000W pink power supply accept my existing AC input that falls between 170 V and 250 V?

Yes, the unit is rated for AC 170-250 V input, so any mains supply within that range will work without modification.

How can I verify the S-1000-24 is delivering a stable 24 V output after installation?

Measure the DC voltage across the V+ and GND terminals with a multimeter; it should read 24 V and the ADJ terminal allows fine adjustment if needed.

What comes in the box with the S-1000-24 and what must I source separately?

The supply itself with L, N, GND, V and ADJ terminals is included; an AC power cord, mounting hardware and any load-side connectors are not supplied.

Tudi v tem oddelku

Stranke so primerjale tudi te

Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.