Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Green circuit board with gold contacts and black memory chips, no heat spreader

NEMIX RAM

NEMIX RAM 128GB DDR5 4800 2Rx4 CL40 1.1V ECC RDIMM Supermicro H13DSG-O-CPU memory upgrade

SKU CH-BAWT-7RFPS

128GB DDR5 4800 ECC registered RDIMM validated for Supermicro H13DSG-O-CPU at CL40 and 1.1V

  • Capacity128GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 128GB

Näytä 30 muuta kokoonpanoa
  • 128GB DDR5-4800 capacity recognised at full speed by Supermicro H13DSG-O-CPU
  • 2Rx4 Registered ECC architecture offloads controller and corrects single-bit errors on the fly
  • 1V CL40 timing matches board memory-controller expectations for stable operation
  • 288-pin RDIMM form factor fits the exact slot type the motherboard requires
  • Lifetime replacement warranty with free US-based technical support included

Server-grade capacity for Supermicro H13DSG-O-CPU

This 128GB DDR5 4800 module delivers registered ECC memory tuned to the exact rank, voltage, and timing the board expects. It targets administrators upgrading or populating that specific Supermicro server platform. Buyers needing unbuffered UDIMM or SODIMM form factors cannot use this kit.

Registered architecture for full-slot population

The 288-pin RDIMM design offloads the memory controller, allowing every supported slot to run fully populated at rated speed without signal degradation. ECC corrects single-bit errors on the fly to prevent silent data corruption and unplanned reboots. Consult the motherboard manual for approved population order and maximum capacity per channel before installation.

Single-module kit with lifetime backing

The package contains one 128GB DDR5 4800 CL40 1.1V 2Rx4 RDIMM ready for immediate installation. No heat spreader is included, so airflow in the chassis must meet the server's thermal requirements. Lifetime replacement coverage and US-based technical support are provided by the manufacturer.

Kohokohdat

  • 128GB DDR5-4800 capacity recognised at full speed by Supermicro H13DSG-O-CPU
  • 2Rx4 Registered ECC architecture offloads controller and corrects single-bit errors on the fly
  • 1V CL40 timing matches board memory-controller expectations for stable operation
  • 288-pin RDIMM form factor fits the exact slot type the motherboard requires
  • Lifetime replacement warranty with free US-based technical support included

Tekniset tiedot

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-724K1
Capacity128GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content128GB DDR5 4800MHz PC5-38400 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

Does the 2Rx4 registered ECC design let all slots run at 4800 MHz when fully populated?

Yes, the registered architecture offloads the memory controller so every slot runs fully populated at the rated 4800 MHz speed.

How much heat and power should I expect from this 1.10 V module during continuous operation?

At 1.10 V with no heat spreader, the module runs cool and draws minimal power, suited for 24/7 server workloads.

My Supermicro H13DSG-O-CPU board needs DDR5 RDIMMs — will this 288-pin kit install without extra parts?

Yes, the 288-pin DDR5 RDIMM form factor matches the board's slots exactly; no adapters or other components are required.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.