Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Green circuit board with black chips, gold edge connector, no heat spreader

NEMIX RAM

NEMIX RAM 128GB DDR5 4800 CL40 2Rx4 ECC Registered RDIMM Supermicro H14SSL-NT memory upgrade

SKU CH-5DHX-5SHEK

128GB DDR5 4800 registered ECC RDIMM, 2Rx4 CL40 1.1V, validated for Supermicro H14SSL-NT motherboards

  • Capacity128GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 128GB

Näytä 24 muuta kokoonpanoa
  • 128 GB DDR5-4800 RDIMM delivers full-capacity server performance
  • Registered ECC architecture prevents silent data corruption under heavy load
  • CL40 latency at 1.1 V matches the H14SSL-NT memory controller exactly
  • 2Rx4 288-pin form factor fits the board's population rules
  • Lifetime replacement warranty with US-based technical support included

Supermicro H14SSL-NT DDR5 upgrade

This NEMIX RAM module adds 128 GB of DDR5-4800 registered ECC memory to a Supermicro H14SSL-NT motherboard. The 288-pin RDIMM form factor matches the board's registered DIMM slots and population rules. It is intended for administrators expanding capacity in compatible Supermicro server platforms.

2Rx4 rank and 1.1 V registered ECC

The single specification that determines fit is the 2Rx4 registered ECC organisation at 1.1 V with CL40 timing. This exact rank structure, voltage and error-correction mode is what the H14SSL-NT memory controller expects for full-speed operation. A UDIMM, different rank or voltage would not be recognised or would run at reduced capacity.

Single-module kit with lifetime support

The package contains one 128 GB RDIMM and no additional cables, brackets or software. NEMIX RAM provides lifetime replacement coverage and US-based technical assistance for the module itself. Buyers who need multiple matched modules or a pre-validated multi-DIMM kit should verify their board's population guide before ordering.

Kohokohdat

  • 128 GB DDR5-4800 RDIMM delivers full-capacity server performance
  • Registered ECC architecture prevents silent data corruption under heavy load
  • CL40 latency at 1.1 V matches the H14SSL-NT memory controller exactly
  • 2Rx4 288-pin form factor fits the board's population rules
  • Lifetime replacement warranty with US-based technical support included

Tekniset tiedot

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-724K1
Capacity128GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content128GB DDR5 4800MHz PC5-38400 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

What does the 4800 MT/s rating mean once the module is installed in a Supermicro H14SSL-NT?

The module will run at DDR5-4800 (PC5-38400) with CL40 timings at 1.1 V, delivering the exact speed and latency the motherboard's memory controller expects when populated per its rules.

How does the 288-pin RDIMM interface and registered design affect what the system can do?

The 288-pin registered form factor is required by the H14SSL-NT; the buffered architecture lets every slot run fully populated at the rated 128 GB capacity while ECC corrects single-bit errors on the fly.

What physical clearance does this 288-pin RDIMM need to fit in the server?

It uses the standard 288-pin RDIMM height with no heat spreader, so it fits the H14SSL-NT's DIMM slots without extra clearance beyond the motherboard's normal layout.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.