BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
NEMIX RAM
16 GB DDR4 3200 ECC UDIMM module with CL22 latency and 2Rx8 organisation
This module provides 16 GB of DDR4 ECC unbuffered memory in a single 288-pin DIMM. It is intended for Kingston-branded servers or workstations that require error-correcting memory without registered buffering.
The memory runs at DDR4 3200 (PC4-25600) with a CAS latency of 22 cycles. Systems that cannot accept CL22 or that demand a lower latency grade will not operate at the rated speed with this module.
The dual-rank 2Rx8 chip layout means the motherboard must support two ranks per channel in an unbuffered ECC configuration. Boards limited to single-rank or registered DIMMs will not recognise this part.
| Brand | NEMIX RAM |
|---|---|
| Series | Kingston Server/Workstaion Compatible Series Memory |
| Model | Kingston DDR4 3200MHZ ECC Unbuffered UDIMM |
| Part Number | ME25600-628K1 |
| Capacity | 16GB |
| Speed | DDR4 3200 (PC4 25600) |
| ECC | Yes |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | Kingston |
| CAS Latency | CL22 |
| Heat Spreader | No |
| Type | 288-Pin DDR4 ECC UDIMM |
| Rank | 2Rx8 |
| Features | DDR4 ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 16GB (1X16GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 288-PIN ECC Unbuffered UDIMM |
The kit is a single 16 GB DDR4 3200 CL22 ECC UDIMM; adding a matching stick enables dual-channel bandwidth on boards that support it.
The module runs at DDR4 3200 (PC4-25600) with CL22 latency at 1.2 V, providing error-correcting throughput for compatible Kingston-qualified platforms.
It uses the standard 288-pin DDR4 UDIMM form factor with ECC and unbuffered signalling; verify your board accepts ECC UDIMMs before installing.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Ei vastaavaa kieltä.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?