We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green DDR4 UDIMM circuit board with black memory chips and gold edge connector

NEMIX RAM

NEMIX RAM 16GB (1X16GB) DDR4 3200 CL22 2Rx8 ECC UDIMM Kingston KSM32ED8/16HD KSM32ED8/16MR memory upgrade

SKU CH-30ZQ-Z71J0

16 GB DDR4 3200 ECC UDIMM module with CL22 latency and 2Rx8 organisation

  • Capacity16GB
  • SpeedDDR4 3200 (PC4 25600)
  • ECCYes
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • ECC protection prevents data errors in critical workloads
  • DDR4 3200 speed delivers 25600 MB/s bandwidth for responsive performance
  • CL22 latency timing balances stability with system compatibility
  • 2Rx8 dual-rank organisation increases memory density per slot
  • 2 V operation matches standard DDR4 voltage for broad motherboard support

16 GB DDR4 ECC UDIMM for Kingston systems

This module provides 16 GB of DDR4 ECC unbuffered memory in a single 288-pin DIMM. It is intended for Kingston-branded servers or workstations that require error-correcting memory without registered buffering.

CL22 timing at 3200 MT/s defines the latency floor

The memory runs at DDR4 3200 (PC4-25600) with a CAS latency of 22 cycles. Systems that cannot accept CL22 or that demand a lower latency grade will not operate at the rated speed with this module.

2Rx8 organisation determines motherboard

The dual-rank 2Rx8 chip layout means the motherboard must support two ranks per channel in an unbuffered ECC configuration. Boards limited to single-rank or registered DIMMs will not recognise this part.

Highlights

  • ECC protection prevents data errors in critical workloads
  • DDR4 3200 speed delivers 25600 MB/s bandwidth for responsive performance
  • CL22 latency timing balances stability with system compatibility
  • 2Rx8 dual-rank organisation increases memory density per slot
  • 2 V operation matches standard DDR4 voltage for broad motherboard support

Specifications

BrandNEMIX RAM
SeriesKingston Server/Workstaion Compatible Series Memory
ModelKingston DDR4 3200MHZ ECC Unbuffered UDIMM
Part NumberME25600-628K1
Capacity16GB
SpeedDDR4 3200 (PC4 25600)
ECCYes
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemKingston
CAS LatencyCL22
Heat SpreaderNo
Type288-Pin DDR4 ECC UDIMM
Rank2Rx8
FeaturesDDR4 ECC Unbuffered UDIMM Motherboard Compatible
Package Content16GB (1X16GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 288-PIN ECC Unbuffered UDIMM

Questions about this item

Should I pick the 16 GB module or add a second stick for dual-channel?

The kit is a single 16 GB DDR4 3200 CL22 ECC UDIMM; adding a matching stick enables dual-channel bandwidth on boards that support it.

What does the 3200 MT/s rating deliver in an actual server or workstation?

The module runs at DDR4 3200 (PC4-25600) with CL22 latency at 1.2 V, providing error-correcting throughput for compatible Kingston-qualified platforms.

Will the 288-pin DDR4 ECC UDIMM fit my motherboard's memory slots?

It uses the standard 288-pin DDR4 UDIMM form factor with ECC and unbuffered signalling; verify your board accepts ECC UDIMMs before installing.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.