Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Two green circuit boards with black memory chips and gold edge connectors

NEMIX RAM

NEMIX RAM 16GB (2x8GB) DDR4 2933MHz CL21 1.2V UDIMM memory upgrade

SKU CH-PMG1-6VCH6

16 GB dual-channel DDR4-2933 kit validated for Supermicro X12SAE and X12SCA-F motherboards

  • Capacity16GB (2 x 8GB)
  • Type288-Pin DDR4 UDIMM
  • SpeedDDR4 2933 (PC4 23400)
  • CAS LatencyCL21
  • Voltage1.20V
  • ECCNo

Size 16GB 2X8GB

  • 16 GB kit lets you run more apps at once
  • DDR4 2933 MHz speed matches the board's rated frequency
  • CL21 latency and 1.20 V voltage meet the memory controller's exact spec
  • 288-pin UDIMM form factor fits Supermicro X12SAE and X12SCA-F motherboards
  • Built with major OEM chips from Samsung Micron or Hynix for tested stability

Matched DDR4-2933 Kit for Supermicro Boards

This 16 GB kit contains two 8 GB DDR4 UDIMMs rated at 2933 MT/s with CL21 timings at 1.2 V. The modules are unbuffered, non-ECC, single-rank 1Rx8 parts built with major OEM chips. They are specified to work with Supermicro X12SAE and X12SCA-F motherboards.

Builders with compatible Supermicro X12SAE

Owners of those exact boards who need a straight-forward capacity increase will find the kit drops in at rated speed. Systems that require ECC, registered DIMMs, SODIMM form factors, or a different DDR generation cannot use this memory.

DDR4 2933 CL21 1.2 V unbuffered specification

The DDR4-2933 (PC4-23400) CL21 1.2 V unbuffered rating is the single parameter set the motherboard's memory controller expects. Matching that exact speed, voltage, and timing allows the system to recognise the full 16 GB and run at the rated frequency.

Kohokohdat

  • 16 GB kit lets you run more apps at once
  • DDR4 2933 MHz speed matches the board's rated frequency
  • CL21 latency and 1.20 V voltage meet the memory controller's exact spec
  • 288-pin UDIMM form factor fits Supermicro X12SAE and X12SCA-F motherboards
  • Built with major OEM chips from Samsung Micron or Hynix for tested stability

Tekniset tiedot

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR4 Non-ECC Unbuffered UDIMM Memory
Part NumberMD23400-818K2
Capacity16GB (2 x 8GB)
Type288-Pin DDR4 UDIMM
SpeedDDR4 2933 (PC4 23400)
CAS LatencyCL21
Voltage1.20V
ECCNo
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR4 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content16GB 2X8GB DDR4 2933MHz PC4-23400 1Rx8 1.2V 288-PIN Non-ECC UDIMM KIT

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

Will the 2933 MHz CL21 timing hold when the memory controller is saturated for hours?

The kit runs at the rated 2933 MHz with CL21 latency at 1.20 V; without a heat spreader the modules rely on case airflow to maintain those timings under sustained load.

How much noise and heat do the bare 288-pin UDIMMs add when the system runs all day?

The modules have no heat spreader and draw 1.20 V, so they generate minimal heat and no noise of their own; system fan speed will determine overall acoustics.

What must the motherboard provide for this 2 x 8 GB kit to work?

A DDR4 288-pin UDIMM slot that supports non-ECC unbuffered memory at 1.20 V and can run the 1Rx8 modules at 2933 MHz (PC4-23400).

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.